The TPS6261x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6261x supports up to 350-mA load current, and allows the use of low cost chip inductor and capacitors.

With a wide input voltage range of 2.3V to 5.5V, the device supports applications powered by Li-Ion batteries with extended voltage range. Different fixed voltage output versions are available from 1.2V to 2.3V.

The TPS6261x operates at a regulated 6-MHz switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load current range.

The PFM mode extends the battery life by reducing the quiescent current to 31µA (typ) during light load operation. For low-frequency noise-sensitive applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. These features, combined with high PSRR and AC load regulation performance, make this device suitable to replace a linear regulator to obtain better power conversion efficiency.

The TPS6261x is available in an 6-pin thin chip-scale package (CSP, 0.4mm max. height).

• 90% Efficiency at 6MHz Operation
• 31μA Quiescent Current
• Wide VIN Range From 2.3V to 5.5V
• 6MHz Regulated Frequency Operation
• Best in Class Load and Line Transient
• ±2% Total DC Voltage Accuracy
• Automatic PFM/PWM Mode Switching
• Low Ripple Light-Load PFM Mode
• >50dB VIN PSRR (1kHz to 10kHz)
• Internal Soft-Start, 100-μs Start-Up Time
• Integrated Active Power-Down Sequencing (Optional)
• Three Surface-Mount External Components Required (One 0603 MLCC Inductor, Two 0402 Ceramic Capacitors)
• Complete Sub 0.4-mm Component Profile Solution
• Total Solution Size <10 mm2
• Available in a 6-Pin NanoFree (CSP) Ultra-Thin Packaging
• APPLICATIONS
  • Cell Phones, Smart-Phones
  • WLAN, GPS and Bluetooth Applications
  • DTV Tuner Applications
  • DC/DC Micro Modules

NanoFree is a trademark of Texas Instruments.

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 1.2
• Vout (Max) (V)
• 1.2
• Iout (Max) (A)
• 0.35
• Iq (Typ) (uA)
• 31
• Switching frequency (Min) (kHz)
• 5400
• Switching frequency (Max) (kHz)
• 6600
• Features
• Enable, Forced PWM, Light Load Efficiency, Output Discharge, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62615的完整型号有：TPS62615YFDR、TPS62615YFDT，以下是这些产品的关键参数及官网采购报价：

TPS62615YFDR，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62615YFDR的批量USD价格：.377（1000+）

TPS62615YFDT，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62615YFDT的批量USD价格：.452（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)