The TPS6265x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6265x supports up to 800mA load current and allows the use of small, low cost inductors and capacitors.

The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I²C interface down to 0.75V, the device supports low-voltage DSPs and processors core power supplies in smart-phones and handheld computers.

The TPS6265x operates at a regulated 6MHz switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 3.5µA.

The serial interface is compatible with Standard, Fast/Fast Plus and High-Speed mode I²C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5mV, for setting the output voltage or reprogramming the mode of operation (PFM/PWM or Forced PWM) for instance.

The TPS6265x is available in an 9-pin chip-scale package (CSP).

• 86% Efficiency at 6 MHz Operation
• 38μA Quiescent Current
• Wide VIN Range From 2.3 V to 5.5 V
• 6MHz Regulated Frequency Operation
• Best-In-Class Load and Line Transient
• ±2% PWM DC Voltage Accuracy
• Automatic PFM/PWM Mode Switching
• Low Ripple Light-Load PFM
• I2C Compatible Interface up to 3.4 Mbps
• Pin-Selectable Output Voltage (VSEL)
• Internal Soft-Start, <150-μs Start-Up Time
• Current Overload and Thermal Shutdown Protection
• Three Surface-Mount External Components Required (One MLCC Inductor, Two Ceramic Capacitors)
• Complete Sub 1-mm Component Profile Solution
• Total Solution Size <13mm2
• Available in a 9-Pin NanoFree (CSP) Packaging
• APPLICATIONS
  • SmartReflex Compliant Power Supply
  • OMAP Application Processor Core Supply
  • Cell Phones, Smart-Phones
  • Micro DC-DC Converter Modules

NanoFree Is a trademark of Texas Instruments SmartReflex Is a trademark of Texas Instruments OMAP Is a trademark of Texas Instruments

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0.75
• Vout (Max) (V)
• 1.4375
• Iout (Max) (A)
• 0.8
• Iq (Typ) (uA)
• 38
• Switching frequency (Min) (kHz)
• 5400
• Switching frequency (Max) (kHz)
• 6600
• Features
• Enable, Light Load Efficiency, Output Discharge, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62651的完整型号有：TPS62651YFFR、TPS62651YFFT，以下是这些产品的关键参数及官网采购报价：

TPS62651YFFR，工作温度：-40 to 85，封装：DSBGA (YFF)-9，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62651YFFR的批量USD价格：.572（1000+）

TPS62651YFFT，工作温度：-40 to 85，封装：DSBGA (YFF)-9，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62651YFFT的批量USD价格：.686（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)