The TPS6266x device is a high-frequency synchronous step-down DC-DC converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6266x supports up to 1000-mA peak load current, and allows the use of low-cost chip inductor and capacitors.

With a wide input voltage range of 2.3 V to 5.5 V, the device supports applications powered by Li-Ion batteries with extended voltage range. Different fixed voltage output versions are available from 1.2 V to 2.3 V.

The TPS6266x operates at a regulated 6-MHz switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load current range.

The PFM mode extends the battery life by reducing the quiescent current to 31 µA (typical) during light load and standby operation. For noise-sensitive applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA.

The TPS6266x is available in an 6-pin chip scale package (DSBGA).

• 91% Efficiency at 6-MHz Operation
• 31-μA Quiescent Current
• Wide VIN Range from 2.3 V to 5.5 V
• 6-MHz Regulated Frequency Operation
• Best in Class Load and Line Transient
• ±2% Total DC Voltage Accuracy
• Automatic PFM or PWM Mode Switching
• Low Ripple Light-Load PFM Mode
• Fast Turnon Time: < 60-μs Start-Up Time
• Integrated Active Power-Down Sequencing (Optional)
• Current Overload and Thermal Shutdown Protection
• Three Surface-Mount External Components Required (One MLCC Inductor, Two Ceramic Capacitors)
• Complete Sub 1-mm Component Profile Solution
• Total Solution Size <12 mm2
• Available in a 6-Pin NanoFree (DSBGA)
• APPLICATIONS
  • Cell Phones and Smart Phones
  • PDAs and Pocket PCs
  • Portable Hard Disk Drives
  • DC-DC Micro Modules

NanoFree Is a trademark of Texas Instruments All other trademarks are the property of their respective owners

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 1.2
• Vout (Max) (V)
• 1.2
• Iout (Max) (A)
• 1
• Iq (Typ) (uA)
• 31
• Switching frequency (Min) (kHz)
• 5400
• Switching frequency (Max) (kHz)
• 6600
• Features
• Enable, Forced PWM, Light Load Efficiency, Output Discharge, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 55

TPS62665的完整型号有：TPS62665YFFR、TPS62665YFFT，以下是这些产品的关键参数及官网采购报价：

TPS62665YFFR，工作温度：-40 to 85，封装：DSBGA (YFF)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62665YFFR的批量USD价格：.571（1000+）

TPS62665YFFT，工作温度：-40 to 85，封装：DSBGA (YFF)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62665YFFT的批量USD价格：.685（1000+）

TPS62660EVM-419 — 用于 TPS62660 1000mA、6MHz 同步降压转换器的评估模块

TPS62660EVM-419 是一块完全组装且经过测试的电路板，用于评估 TPS62660 降压 DC-DC 转换器。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)