The TPS6267x devices are high-frequency synchronous step-down dc-dc converters optimized for small battery-powered applications. Intended for low-power applications, the TPS6267x supports up to 650-mA load current and allows the use of low cost chip inductor and capacitors.

With a wide input voltage range of 2.3V to 4.8V, the device supports applications powered by Li-Ion batteries with extended voltage range. Different fixed voltage output versions are available from 1.05V to 2.1V. The TPS6267x operates at a regulated 6-MHz switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load current range.

The PFM mode extends the battery life by reducing the quiescent current to 17µA (typ) during light load operation. For noise-sensitive applications, the device has PWM spread spectrum capability providing a lower noise regulated output, as well as low noise at the input. These features, combined with high PSRR and AC load regulation performance, make this device suitable to replace a linear regulator to obtain better power conversion efficiency.

• 92% Efficiency at 6MHz Operation
• 17μA Quiescent Current
• Wide VIN Range From 2.3V to 4.8V
• 6MHz Regulated Frequency Operation
• Spread Spectrum, PWM Frequency Dithering
• Best in Class Load and Line Transient
• ±2% Total DC Voltage Accuracy
• Low Ripple Light-Load PFM Mode
• ≥35dB VIN PSRR (1kHz to 10kHz)
• Simple Logic Enable Inputs
• Supports External Clock Presence Detect Enable Input
• Three Surface-Mount External Components Required (One 0603 MLCC Inductor, Two 0402 Ceramic Capacitors)
• Complete Sub 0.33-mm Component Profile Solution
• Total Solution Size <10 mm2
• Available in a 6-Pin NanoFree? (CSP) Ultra-Thin Packaging, 0.4 mm Max. Height

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 4.8
• Vout (Min) (V)
• 1.05
• Vout (Max) (V)
• 1.05
• Iout (Max) (A)
• 0.65
• Iq (Typ) (uA)
• 17
• Switching frequency (Min) (kHz)
• 5400
• Switching frequency (Max) (kHz)
• 6600
• Features
• Enable, Forced PWM, Light Load Efficiency, Output Discharge, Spread Spectrum, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS626765的完整型号有：TPS626765YFDR、TPS626765YFDT，以下是这些产品的关键参数及官网采购报价：

TPS626765YFDR，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS626765YFDR的批量USD价格：.418（1000+）

TPS626765YFDT，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS626765YFDT的批量USD价格：.502（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)