The TPS62693 device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS62693 supports up to 800-mA load current, and allows the use of low cost chip inductor and capacitors.

The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. Different fixed output voltage versions are available in the range from 2.2 V up to 3.3 V.

The TPS62693 operates at a regulated 3-MHz switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load current range.

The PFM mode extends the battery life by reducing the quiescent current to 21 µA (typical) during light load operation. For noise-sensitive applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. This feature, combined with high PSRR and AC load regulation performance, make this device suitable to replace a linear regulator to obtain better power conversion efficiency.

• 95% Efficiency at 3MHz Operation
• 21 μA Quiescent Current
• 3 MHz Regulated Frequency Operation
• Spread Spectrum, PWM Frequency Dithering
• High Duty-Cycle Operation
• ±2% Total DC Voltage Accuracy
• Load and Line Transient
• Excellent AC Load Regulation
• Low Ripple Light-Load PFM Mode
• ≥40 dB VIN PSRR (1 kHz to 10 kHz)
• Internal Soft Start, 350-μs Start-Up Time
• Integrated Active Power-Down Sequencing (Optional)
• Current Overload and Thermal Shutdown Protection
• Three Surface-Mount External Components Required (One 2012 MLCC Inductor, Two 0402 Ceramic Capacitors)
• Complete Sub 1-mm Component Profile Solution
• Total Solution Size <12 mm2 (CSP)
• Available in a 6-Pin NanoFree (CSP)

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 4.8
• Vout (Min) (V)
• 3
• Vout (Max) (V)
• 3
• Iout (Max) (A)
• 0.8
• Iq (Typ) (uA)
• 19
• Switching frequency (Min) (kHz)
• 2700
• Switching frequency (Max) (kHz)
• 3000
• Features
• Enable, Forced PWM, Light Load Efficiency, Output Discharge, Spread Spectrum
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62698的完整型号有：TPS62698YFDR、TPS62698YFDT，以下是这些产品的关键参数及官网采购报价：

TPS62698YFDR，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62698YFDR的批量USD价格：.464（1000+）

TPS62698YFDT，工作温度：-40 to 85，封装：DSBGA (YFD)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62698YFDT的批量USD价格：.557（1000+）

TPS62692EVM-076 — TPS62692EVM-076 评估模块

高效 VIN 降压转换器评估模块板演示 TPS62690/1/2/3 高效 VIN 降压转换器。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)