The TPS6275x device is a highly efficient synchronous step down dc-dc converter optimized for USB powered portable applications. It can provide up to 1300mA average input current and is ideal for applications connected to a USB host.

With an input voltage range of 2.9 V to 6.0V, the device supports batteries with extended voltage range and is ideal for powering USB applications where USB compliance is required.

The TPS62750 operates at 2.25-MHz fixed switching frequency and enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. The TPS62751 operates in Forced PWM mode allowing use in applications that are noise sensitive. An output discharge allows the load to discharge in shutdown.

The 10% accurate average input current limit can be programmed with an external resistor, allowing use in applications such as USB, where the current drawn from the bus must be limited to 500mA.

The TPS6275x allows the use of small inductors and capacitors to achieve a small solution size. The TPS6275x is available in a 2,5mm × 2,5mm 10-pin SON package.

• Efficiency > 90% at Nominal Operating Conditions
• Programmable Average Input Current Limits for USB Applications
  • 50mA to 300mA for Low Current Limit Range
  • 300mA to 1.3A for High Current Limit Range ±10% Current Accuracy
• Stable Output Voltage for Load Transients to Minimize Overshoot at Load Step Response
• Hot Plug and Reverse Current Protection
• Automatic PFM/PWM Mode transition (TPS62750)
• Forced PWM for Noise Sensitive Applications (TPS62751)
• VIN Range From 2.9V to 6V
• Adjustable VOUT From 0.8V to 0.85×VIN
• Softstart for Inrush Current Prevention
• 2.25 MHz Fixed Frequency Operation
• Short Cicruit and Thermal Shutdown Protection
• Available in a 2.5 × 2.5 10 pin SON Package
• APPLICATIONS
  • USB Wireless Modems
  • Portable USB peripherals
  • Handheld Computers

• Vin (Min) (V)
• 2.9
• Vin (Max) (V)
• 6
• Vout (Min) (V)
• 0.8
• Vout (Max) (V)
• 5.1
• Iout (Max) (A)
• 1.3
• Iq (Typ) (uA)
• 780
• Switching frequency (Min) (kHz)
• 2000
• Switching frequency (Max) (kHz)
• 2500
• Features
• Adjustable Current Limit, Enable, Light Load Efficiency, Output Discharge, Synchronous Rectification
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62750的完整型号有：TPS62750DSKR、TPS62750DSKT，以下是这些产品的关键参数及官网采购报价：

TPS62750DSKR，工作温度：-40 to 85，封装：SON (DSK)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS62750DSKR的批量USD价格：.639（1000+）

TPS62750DSKT，工作温度：-40 to 85，封装：SON (DSK)-10，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS62750DSKT的批量USD价格：.767（1000+）

TPS62750EVM-413 — TPS62750EVM-413 评估模块

TPS62750EVM-413 是一块完全组装且经过测试的电路板，用于评估 TPS62750，它被配置为提供 3.3V 电压，并且具有 1000mA 或 500mA 的可选输入电流限制。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)