The TPS650231 device is an integrated power management IC for applications powered by one Li-Ion or Li-Polymer cell, and which requires multiple power rails. The TPS650231 provides three highly efficient step-down converters targeted at providing the core voltage, peripheral, I/O, and memory rails in a processor-based system. The core converter allows for on-the-fly voltage changes through serial interface, allowing the system to implement dynamic power savings.

All three step-down converters enter a low-power mode at light load for maximum efficiency across the widest possible range of load currents. The TPS650231 also integrates two general-purpose, 200-mA LDO voltage regulators, which are enabled with an external input pin. Each LDO operates with an input voltage range from 1.5 V to 6.5 V, thus allowing them to be supplied from one of the step-down converters or directly from the battery. The default output voltage of the LDOs can be digitally set to 4 different voltage combinations using the DEFLDO1 and DEFLDO2 pins. The serial interface can be used for dynamic voltage scaling, masking interrupts, or for disabling, enabling, and setting the LDO output voltages. The interface is compatible with the fast and standard mode I²C specifications, allowing transfers at up to 400 kHz. The TPS650231 is available in a 40-pin VQFN (RSB) package or in a 49-ball DSBGA (YFF) package, and operates over a free-air temperature of –40°C to +85°C.

• 1.7-A, 90% Efficient Step-Down Converter for Processor Core (VDCDC1)
• 1.2-A, Up to 95% Efficient Step-Down Converter for System Voltage (VDCDC2)
• 0.8-A, 92% Efficient Step-Down Converter for Memory Voltage (VDCDC3)
• 30-mA LDO and Switch for Real-Time Clock (VRTC)
• 2 × 200-mA General-Purpose LDO
• Dynamic Voltage Management for Processor Core
• Preselectable LDO Voltage Using Two Digital Input Pins
• Externally Adjustable Reset Delay Time
• Battery Backup Functionality
• Separate Enable Pins for Inductive Converters
• I2C?-Compatible Serial Interface
• 85-μA Quiescent Current
• Low-Ripple PFM Mode
• Thermal Shutdown Protection
• Available in 40-Pin, 5-mm × 5-mm VQFN (RSB) or 49-Ball, 3-mm × 3-mm DSBGA (YFF) Package

• Regulated outputs (#)
• 6
• Vin (Min) (V)
• 2.5
• Vin (Max) (V)
• 6
• Iout (Max) (A)
• 1.7
• Rating
• Catalog
• LDO
• 3
• Iq (Typ) (mA)
• 0.085
• Features
• Comm Control, Power Good, Power Sequencing
• Processor name
• OMAP, Sitara AM35x, DM35x, DM64x
• Processor supplier
• Texas Instruments
• Shutdown current (ISD) (Typ) (uA)
• 23
• Switching frequency (Typ) (kHz)
• 2250
• Configurability
• Hardware configurable, Software configurable

TPS650231的完整型号有：TPS650231RSBR、TPS650231RSBT、TPS650231YFFR、TPS650231YFFT，以下是这些产品的关键参数及官网采购报价：

TPS650231RSBR，工作温度：-40 to 85，封装：WQFN (RSB)-40，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS650231RSBR的批量USD价格：2.196（1000+）

TPS650231RSBT，工作温度：-40 to 85，封装：WQFN (RSB)-40，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS650231RSBT的批量USD价格：2.635（1000+）

TPS650231YFFR，工作温度：-40 to 85，封装：DSBGA (YFF)-49，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS650231YFFR的批量USD价格：2.196（1000+）

TPS650231YFFT，工作温度：-40 to 85，封装：DSBGA (YFF)-49，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS650231YFFT的批量USD价格：2.635（1000+）

TPS650231EVM-664 — TPS650231 评估模块

德州仪器 (TI) TPS650231EVM-664 作为一款集成的电源管理集成电路，适用于通过单节锂离子或锂聚合物电池供电并要求使用多路电源轨的应用。TPS650231 包含三个高效开关降压转换器、两个 LDO，以及附加状态和 I/O 引脚。器件可通过 I2C 接口 (HPA172) 进行控制