The TPS6514x series offers a compact and small power supply solution to provide all three voltages required by thin film transistor (TFT) LCD displays. The auxiliary linear regulator controller can be used to generate a 3.3-V logic power rail for systems powered by a 5-V supply rail only.

The main output V_O1 is a 1.6-MHz fixed frequency PWM boost converter providing the source drive voltage for the LCD display. The device is available in two versions with different internal switch current limits to allow the use of a smaller external inductor when lower output power is required. The TPS65140 and TPS65141 has a typical switch current limit of 2.3 A and the TPS65145 has a typical switch current limit of 1.37 A. A fully integrated adjustable charge pump doubler or tripler provides the positive LCD gate drive voltage. An externally adjustable negative charge pump provides the negative gate drive voltage. Due to the high 1.6-MHz switching frequency of the charge pumps, inexpensive and small 220-nF capacitors can be used.

Additionally, the TPS6514x series has a system power good output to indicate when all supply rails are acceptable. For LCD panels powered by 5 V the device has a linear regulator controller using an external transistor to provide a regulated 3.3-V output for the digital circuits. For maximum safety, the TPS65140 and TPS65145 goes into shutdown as soon as one of the outputs is out of regulation. The device can be enabled again by toggling the input or the enable (EN) pin to GND. The TPS65141 does not enter shutdown when one of its outputs is below its power good threshold.

• 2.7-V to 5.8-V Input Voltage Range
• 1.6-MHz Fixed Switching Frequency
• 3 Independent Adjustable Outputs
• Main Output up to 15 V With <1% Typical Output Voltage Accuracy
• Virtual Synchronous Converter Technology
• Negative Regulated Charge Pump Driver VO2
• Positive Charge Pump Converter VO3
• Auxiliary 3.3-V Linear Regulator Controller
• Internal Soft Start
• Internal Power-On Sequencing
• Fault Detection of All Outputs (TPS65140 and TPS65145)
• No Fault Detection (TPS65141)
• Thermal Shutdown
• System Power Good
• Available in 24-Pin HTSSOP and 24-Pin VQFN PowerPAD? Packages

• Display type
• LCD unipolar
• IC integration
• LCD bias
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Source driver voltage (Min) (V)
• 5
• Source driver voltage (Max) (V)
• 15
• Level shifter/scan driver (ch)
• 0
• V_POS (Max) (V)
• 30
• V_NEG (Max) (V)
• -2
• Topology
• Boost
• Rating
• Catalog

TPS65140的完整型号有：TPS65140PWP、TPS65140PWPR、TPS65140RGER，以下是这些产品的关键参数及官网采购报价：

TPS65140PWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65140PWP的批量USD价格：1.408（1000+）

TPS65140PWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65140PWPR的批量USD价格：1.198（1000+）

TPS65140RGER，工作温度：-40 to 85，封装：VQFN (RGE)-24，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65140RGER的批量USD价格：1.198（1000+）

TPS65100EVM-030 — TPS65100 评估模块

TPS65100EVM-030 是一款评估工具，用于评估 TFT LCD 显示器的 TPS6510x 多通道电源。此评估模块可以接受范围在 2.7V 至 5.8V 之间的输入电压，并为 TFT 显示提供 10V、-5V 和 23V 的电源。其他电压可通过改变电阻反馈网络进行调节。此外，TPS6510x 还提供 VCOM 缓冲电压和 3.3V LDO 集成式控制器。

TPS65140EVM-031 — TPS65140 评估模块

The TPS65140EVM-031 is an evaluation tool for the TPS6514x multi-channel power supply for TFT LCD displays. The evaluation module can accept input voltages in range of 2.7V to 5.8V and supplies 10V, -5V and 23V to power a TFT display. Other voltages can be adjusted by changing resistor feedback (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)