The TPS65162 is a compact LCD bias IC with two high-speed operational amplifiers for the V_com supply. The high current capability of the device is ideal for large LCD-monitor and LCD-TV applications.

The TPS65162 generates all four voltage rails for a TFT LCD (Vs, Vlogic, VGH and VGL) and includes two op-amps to generate the VCOM supply rail. An input-to-output isolation switch is integrated into the device, providing short-circuit protection for the boost converter. A current-limit function is implemented in the input-to-output isolation switch to allow soft turn-on during start-up. The device also features gate voltage shaping for improved TFT-LCD picture quality. The device consists of a boost converter to provide the source voltage Vs, and a step-down converter to provide the logic voltage for the system. A positive and a negative charge-pump driver provide adjustable regulated output voltages VGH and VGL to bias the TFT. Both boost and buck converter, as well as the charge-pump drivers, operate with a fixed switching frequency of 500 kHz or 750 kHz, selectable by the FREQ pin. The device includes adjustable power-on sequencing. The safety features of the device are overvoltage protection for boost converter, short-circuit protection for Vs, Vlogic and VGH, and thermal shutdown.

• 8-V to 14.7-V Input Voltage Range
• 500 kHz / 750 kHz Fixed Switching Frequency
• Boost Output Voltage up to 19 V
  • 1%-Accurate Boost With 2.8-A Switch Current Overvoltage Protection
• Input-to-Output Isolation Switch for Vs Short-Circuit protection for Boost
• 2.5-A Step-Down Converter
• Regulated Positive Charge-Pump Driver VGH
• Regulated Negative Charge-Pump Driver VGL
• Gate Voltage Shaping for VGH
• Soft Start for all Converters
• Two Integrated High-Speed Opamps
  • 50-MHz, 3-dB Bandwidth
  • Slew Rate 55 V / μs
  • 215-mA Short-Circuit Current
• 48 Pin 7x7 mm QFN Package

• Display type
• LCD unipolar
• IC integration
• LCD bias
• Vin (Min) (V)
• 8
• Vin (Max) (V)
• 14.7
• Source driver voltage (Max) (V)
• 19
• Level shifter/scan driver (ch)
• 0
• V_POS (Max) (V)
• 34
• V_NEG (Max) (V)
• -2
• Features
• VCOM or op amp
• Topology
• Boost, Buck
• Rating
• Catalog

TPS65162的完整型号有：TPS65162RGZR，以下是这些产品的关键参数及官网采购报价：

TPS65162RGZR，工作温度：-40 to 85，封装：VQFN (RGZ)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65162RGZR的批量USD价格：.5（1000+）

TPS65162EVM-278 — TPS65162 评估模块

The TPS65162EVM-278 evaluation module operates from a 8V to 14V input rail and provides the three bias-supply voltages (Vs, VGH, and VGL) and a logic-supply voltage (3.3V) that are required for television and monitor TFT-LCD panels. This device also provides two operational (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)