- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:多通道 IC (PMIC)
- 功能描述:采用 280mA 自动拉电流 LDO 稳压器的汽车类 3.6V 至 36V、3.2A 降压转换器
- 点击这里打开及下载TPS65320D-Q1的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TPS65320D-Q1 device is a combination of a high-VIN DC-DC step-down converter, referred to as the buck regulator, with an adjustable switch-mode frequency from 100-kHz to 2.5-MHz, and a high-VIN 280-mA low-dropout (LDO) regulator. The input range is 3.6 V to 36 V for the buck regulator, and 3 V to
36 V for the LDO regulator. The buck regulator has an integrated high-side MOSFET. The LDO regulator features a low-input supply current of 45-µA typical in no-load, also has an integrated MOSFET with an active-low, push-pull reset output pin. The input supply of the LDO regulator auto-source from the output of the buck regulator when it is in operation. Low-voltage tracking feature enables TPS65320D-Q1 to track the input supply during cold-crank conditions.
The buck regulator provides a flexible design to fit system needs. The external loop compensation circuit allows for optimization of the converter response for the appropriate operating conditions. A low-ripple pulse-skip mode reduces the no-load input-supply current to maximum 140 µA.
The device has built-in protection features such as soft start, current-limit, thermal sensing and shutdown due to excessive power dissipation. Furthermore, the device has an internal undervoltage-lockout (UVLO) function that turns off the device when the supply voltage is too low.
- Qualified for Automotive Applications
- AEC-Q100 Qualified with the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- One High-VIN Step-Down DC-DC Converter
- Input Range of 3.6 V to 36 V
- 250-mΩ High-Side MOSFET
- Maximum Load Current 3.2 A, Output Adjustable 1.1 V to 20 V
- Adjustable Switching Frequency 100 kHz to 2.5 MHz
- Synchronizes to External Clock
- High Efficiency at Light Loads With Pulse-Skipping Eco-mode? Control Scheme
- Maximum 140-μA Operating Quiescent Current
- One Low-Dropout Voltage (LDO) Regulator
- Input Range of 3 V to 20 V, With Auto-Source to Balance Efficiency and Lower Standby Current
- 280-mA Current Capability With Typical 35-μA Quiescent Current in No-Load Condition
- Power-Good Output (Push-Pull)
- Low-Dropout Voltage of 300 mV at IO = 200 mA (Typical)
- Overcurrent Protection for Both Regulators
- Overtemperature Protection
- 14-Pin HTSSOP Package With PowerPAD? Integrated Circuit Package
- Regulated outputs (#)
- 2
- Vin (Min) (V)
- 3.6
- Vin (Max) (V)
- 36
- Iout (Max) (A)
- 3.2
- Rating
- Automotive
- LDO
- 1
- Iq (Typ) (mA)
- 0.155
- Features
- Eco-mode, Enable, Over Current Protection, Power Good, Thermal Shutdown, UVLO Fixed
- Processor name
- Generic
- Processor supplier
- Generic
- Shutdown current (ISD) (Typ) (uA)
- 2
- Configurability
- Hardware configurable
TPS65320D-Q1的完整型号有:TPS65320DQPWPRQ1,以下是这些产品的关键参数及官网采购报价:
TPS65320DQPWPRQ1,工作温度:-40 to 125,封装:HTSSOP (PWP)-14,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TPS65320DQPWPRQ1的批量USD价格:.75(1000+)
TPS65320C-EVM — 具有 EcoMode 和 LDO 稳压器的 36V 降压转换器评估模块
德州仪器 (TI) TPS65320C-EVM 评估模块 (EVM) 能帮助设计者评估 TPS65320C-Q1 的操作和性能,TPS65320C-Q1 是具有集成低压差电压稳压器的开关模式直流到直流降压转换器。TPS65320Q1 PSpice Transient Model
此 TI 参考设计是一种汽车电压调节升压转换器模块。该模块的目的是在电压下降期间升高电池电压,从而为车辆电子器件提供稳定的输入电压。这项基于 C2000 的设计将从 12V 汽车电池系统提供高达 400 瓦的功率。此解决方案支持 6V-16V 的连续工作输入电压,并可预防 36V 负载突降,从而提供稳定的 12V 输出电源及电池反向保护TIDA-00275 — 汽车仪表板宽输入电压电源设计
此 TI 参考设计是一种汽车仪表盘宽电压输入电源解决方案,包含一个带有集成 LDO 的宽电压输入降压转换器。还包含一个高效率同步降压直流/直流转换器。另外还包含一个线性稳压器,旨在使 DDR 终端符合 JEDEC SSTL-2 和 JEDEC SSTL-18 规格。此仪表盘电源解决方案已针对中端仪表盘市场进行优化,整个解决方案支持 6.0V-40V 系统功能,可承受启动停止和负载突降情况。前端降压转换器 (TPS65320-Q1) 能够支持 4.5V 冷启动情况。TIDA-00141 — 用于翻转式显示屏的汽车类刷式电机驱动器
此 TIDA-00141 参考设计提供了推动式开关电机驱动系统(用于驱动信息娱乐系统的翻转式显示屏)的快速设置指南。此解决方案还演示了两种反馈方法:一种使用限位开关,另一种使用电机驱动器上的限流设置。此设计提供一种快速解决方案来加快上市步伐,采用所有通过汽车认证的器件,允许直接连接电池,并且无需在软件方面投入精力。此设计通过整合 TPS65320EVM 板来形成该解决方案。TIDA-00133 — 用于汽车类百万像素 CMOS 相机参考设计的同轴无压缩数字视频串行器/解串器
TIDA-00133 参考设计是一种高速串行视频接口,通过此接口,可将远程汽车摄像头模块连接到显示器或机器视觉处理系统。此设计使用 TI 的 FPD-Link III SerDes 技术,通过屏蔽双绞线或同轴电缆传输未压缩的百万像素视频数据、双向控制信号及供电。此设计通过整合 DS90UB913A-CXEVM 和 DS90UB914A-CXEVM 板来形成该解决方案。