The TPS65563A offers a complete solution for a charging photo flash capacitor and flashing xenon tube with an insulated gate bipolar transfer (IGBT) driver. This device has an integrated voltage reference, power switch (SW), comparators for peak current detection/power SW turnon detection/charge complete detection, an IGBT driver, and control logics for charging applications/driving IGBT applications.

Compared with discrete solutions, this device reduces the component count, shrinks the total solution size, and erases the difficulty of design for xenon-tube applications.

Additional advantages are a fast charging time and high efficiency since this device has an optimized pulse width modulation (PWM) control algorithm for photo flash charging. In addition, this device has high accuracy for peak current detection and for charge completion detection. The distribution of charging time is smaller.

Other provisions of the device include sensing the output voltage at the primary side, programmable peak current at the primary side, protection features (thermal shutdown and overcurrent), an output pin for charge completion detection, and input pins for charge enable, flash acceptable, and flash on.

• Wide Input Voltage
  • VBAT = 1.4 V to 12 V
  • VCC = 2.7 V to 5.5 V
• Integrated 50-V Power Switch With Lower RON
• Programmable Peak Current at Primary Side From 0.5 A to 2 A
• Optimized Switch ON/OFF Control for Fast Charging
• Charge Complete Detection at Primary Side With High Accuracy
• Integrated Insulated Gate Bipolar Transfer (IGBT) Driver
• 3-mm × 3-mm, 16-Pin QFN Package
• Protection
  • Overcurrent Protection (OCP)
  • Thermal Shutdown (TSD)
• APPLICATIONS
  • Digital Still Cameras
  • Optical Film Cameras
  • Digital Video Camcorders
  • Cell Phones

PowerPAD Is a trademark of Texas Instruments.

• Input voltage (type)
• Linear
• Topology
• Flyback
• Vin (Min) (V)
• 1.4
• Vin (Max) (V)
• 12
• Iout (Max) (A)
• 2
• Iq (Typ) (mA)
• 3
• Features
• LED Thermal Monitor
• Operating temperature range (C)
• -35 to 85

TPS65563A的完整型号有：TPS65563ARGTR、TPS65563ARGTT，以下是这些产品的关键参数及官网采购报价：

TPS65563ARGTR，工作温度：-35 to 85，封装：VQFN (RGT)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65563ARGTR的批量USD价格：.69（1000+）

TPS65563ARGTT，工作温度：-35 to 85，封装：VQFN (RGT)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS65563ARGTT的批量USD价格：.815（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)