TPS72118-EP_TI 低输入电压无电容 150mA 低压降线性稳压器（增强型产品）

TPS72118-EP的基本参数

制造厂商：TI
产品类别：电源管理
技术类目：线性和低压降 (LDO) 稳压器
功能描述：低输入电压无电容 150mA 低压降线性稳压器（增强型产品）
点击这里打开及下载TPS72118-EP的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

TPS72118-EP的产品详情：

The TPS72118 family of LDO regulators is available in fixed voltage options that are commonly used to power the latest DSPs and microcontrollers with a fixed output to 1.8 V. These regulators can be used in a wide variety of applications ranging from portable, battery-powered equipment to PC peripherals. The family features operation over a wide range of input voltages (1.8 V to 5.5 V) and low dropout voltage (150 mV at full load). Therefore, compared to many other regulators that require 2.5 V or higher input voltages for operation, these regulators can be operated directly from two AAA batteries. Also, the typical quiescent current (ground pin current) is low, starting at 85 µA during normal operation and 3 µA in shutdown mode. These regulators can be operated very efficiently and, in a battery-powered application, help extend the longevity of the device.

Similar LDO regulators require 1 µF or larger output capacitors for stability. However, this regulator uses an internal compensation scheme that stabilizes the feedback loop over the full range of input voltages and load currents with output capacitances as low as 0.1 µF. Ceramic capacitors of this size are relatively inexpensive and available in small footprints.

This family of regulators is particularly suited as a portable power supply solution due to its minimal board space requirement and 1.8 V minimum input voltage. Being able to use two off-the-shelf AAA batteries makes system design easier and also reduces component cost. Moreover, the solution is more efficient than if a regulator with a higher input voltage is used.

TPS72118-EP的优势和特性：

Controlled Baseline
- One Assembly Site
- One Test Site
- One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree(1)
150 mA Low-Dropout (LDO)
Available in 1.8 V Fixed-Output Version
Low Input Voltage Requirement (Down to 1.8 V)
Small Output Capacitor, 0.1 μF
Dropout Voltage Typically 200 mV at 150 mA
Less Than 3μA Quiescent Current in Shutdown Mode
Thermal Protection
Over Current Limitation
5-Pin SOT-23 (DBV) Package
APPLICATIONS
- Portable Communication Devices
- Battery-Powered Equipment
- PCMCIA Cards
- Personal Digital Assistants
- Modems
- Bar Code Scanners
- Backup Power Supplies
- SMPS Post Regulation
- Internet Audio

(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

TPS72118-EP的参数（英文）：

Output options
Fixed Output
Iout (Max) (A)
0.15
Vin (Max) (V)
5.5
Vin (Min) (V)
1.8
Vout (Max) (V)
1.8
Vout (Min) (V)
1.8
Fixed output options (V)
1.8
Noise (uVrms)
90
Iq (Typ) (mA)
0.57
Thermal resistance θJA (°C/W)
259
Rating
HiRel Enhanced Product
Load capacitance (Min) (μF)
0.1
Regulated outputs (#)
1
Features
Enable
Accuracy (%)
3
PSRR @ 100 KHz (dB)
8
Dropout voltage (Vdo) (Typ) (mV)
150
Operating temperature range (C)
-55 to 125

TPS72118-EP具体的完整产品型号参数及价格（美元）：

TPS72118-EP的完整型号有：TPS72118MDBVREP、V62/07636-01XE，以下是这些产品的关键参数及官网采购报价：

TPS72118MDBVREP，工作温度：-55 to 125，封装：SOT-23 (DBV)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS72118MDBVREP的批量USD价格：1.445（1000+）

V62/07636-01XE，工作温度：-55 to 125，封装：SOT-23 (DBV)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/07636-01XE的批量USD价格：1.445（1000+）

TPS72118-EP的评估套件：

TPS72118-EP的电路图解：

TPS72118-EP的评估套件：