The TPS725xx family of 1-A low-dropout (LDO) linear regulators has fixed voltage options available that are commonly used to power the latest DSPs, FPGAs, and microcontrollers. An adjustable option ranging from 1.22 V to 5.5 V is also available. The integrated supervisory circuitry provides an active low RESET signal when the output falls out of regulation. The no capacitor/any capacitor feature allows the customer to tailor output transient performance as needed. Therefore, compared to other regulators capable of providing the same output current, this family of regulators can provide a stand-alone power supply solution or a post regulator for a switch mode power supply.

These regulators are ideal for higher current applications. The family operates over a wide range of input voltages (1.8 V to 6 V) and has very low dropout (170 mV at 1-A).

Ground current is typically 210 µA at full load and drops to less than 80 µA at no load. Standby current is less than 1 µA.

Each regulator option is available in either a SOT223-5, D (TPS72501 only), or DDPAK package. With a low input voltage and properly heatsinked package, the regulator dissipates more power and achieves higher efficiencies than similar regulators requiring 2.5 V or more minimum input voltage and higher quiescent currents. These features make it a viable power supply solution for portable, battery-powered equipment.

Although an output capacitor is not required for stability, transient response and output noise are improved with a 10-µF output capacitor.

Unlike some regulators that have a minimum current requirement, the TPS725 family is stable with no output load current. The low noise capability of this family, coupled with its high current operation and ease of power dissipation, make it ideal for telecom boards, modem banks, and other noise-sensitive applications.

• 1-A Output Current
• Available in 1.5-V, 1.6-V, 1.8-V, 2.5-V Fixed-Output and Adjustable Versions (1.2-V to 5.5-V)
• Input Voltage Down to 1.8 V
• Low 170-mV Dropout Voltage at 1 A (TPS72525)
• Stable With Any Type/Value Output Capacitor
• Integrated Supervisor (SVS) With 50-ms RESET Delay Time
• Low 210-μA Ground Current at Full Load (TPS72525)
• Less than 1-μA Standby Current
• ±2% Output Voltage Tolerance Over Line, Load, and Temperature (-40°C to 125°C)
• Integrated UVLO
• Thermal and Overcurrent Protection
• 5-Lead SOT223-5 or DDPAK and 8-Pin SOP (TPS72501 only) Surface Mount Package
• APPLICATIONS
  • PCI Cards
  • Modem Banks
  • Telecom Boards
  • DSP, FPGA, and Microprocessor Power Supplies
  • Portable, Battery-Powered Applications

• Output options
• Adjustable Output, Fixed Output
• Iout (Max) (A)
• 1
• Vin (Max) (V)
• 6
• Vin (Min) (V)
• 1.8
• Vout (Max) (V)
• 5.5
• Vout (Min) (V)
• 1.22
• Fixed output options (V)
• 1.5, 1.6, 1.8, 2.5
• Noise (uVrms)
• 150
• Iq (Typ) (mA)
• 0.075
• Thermal resistance θJA (°C/W)
• 23
• Rating
• Catalog
• Load capacitance (Min) (μF)
• 10
• Regulated outputs (#)
• 1
• Features
• Enable, Power good
• Accuracy (%)
• 2
• PSRR @ 100 KHz (dB)
• 20
• Dropout voltage (Vdo) (Typ) (mV)
• 170
• Operating temperature range (C)
• -40 to 125

TPS725的完整型号有：TPS72501DCQ、TPS72501DCQR、TPS72501KTTR、TPS72515DCQ、TPS72515DCQR、TPS72515KTTR、TPS72516DCQ、TPS72516DCQR、TPS72516KTTT、TPS72518DCQ、TPS72518DCQR、TPS72518KTTR、TPS72525DCQ、TPS72525DCQR、TPS72525KTTR，以下是这些产品的关键参数及官网采购报价：

TPS72501DCQ，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：78个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72501DCQ的批量USD价格：1.717（1000+）

TPS72501DCQR，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72501DCQR的批量USD价格：1.431（1000+）

TPS72501KTTR，工作温度：-40 to 125，封装：DDPAK/TO-263 (KTT)-5，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网TPS72501KTTR的批量USD价格：1.486（1000+）

TPS72515DCQ，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：78个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72515DCQ的批量USD价格：1.717（1000+）

TPS72515DCQR，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72515DCQR的批量USD价格：1.431（1000+）

TPS72515KTTR，工作温度：-40 to 125，封装：DDPAK/TO-263 (KTT)-5，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网TPS72515KTTR的批量USD价格：1.486（1000+）

TPS72516DCQ，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：78个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72516DCQ的批量USD价格：1.717（1000+）

TPS72516DCQR，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72516DCQR的批量USD价格：1.431（1000+）

TPS72516KTTT，工作温度：-40 to 125，封装：DDPAK/TO-263 (KTT)-5，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网TPS72516KTTT的批量USD价格：1.486（1000+）

TPS72518DCQ，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：78个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72518DCQ的批量USD价格：1.717（1000+）

TPS72518DCQR，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72518DCQR的批量USD价格：1.431（1000+）

TPS72518KTTR，工作温度：-40 to 125，封装：DDPAK/TO-263 (KTT)-5，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网TPS72518KTTR的批量USD价格：1.486（1000+）

TPS72525DCQ，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：78个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72525DCQ的批量USD价格：1.717（1000+）

TPS72525DCQR，工作温度：-40 to 125，封装：SOT-223 (DCQ)-6，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS72525DCQR的批量USD价格：1.431（1000+）

TPS72525KTTR，工作温度：-40 to 125，封装：DDPAK/TO-263 (KTT)-5，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网TPS72525KTTR的批量USD价格：1.486（1000+）

DEM-SOT223LDO — 采用 SOT223 (DCQ) 封装与大多数正输出 LDO 兼容的 DEM-SOT223LDO

The Texas Instruments DEM-SOT223LDO demonstration module (DEM) helps designers evaluate the operation and performance of Texas Instruments low-dropout regulators (LDOs). This module is compatible with most positive output LDOs offered in the SOT223 (DCQ) package.

TPS72518EVM-207 — TPS72518 评估模块

The TPS72518EVM is a tool to facilitate evaluation of the TPS725xx and TPS726xx families of devices. The TPS72518EVM consists of the SLVP207 PCB, one TPS72518 1.8-V, 1-A linear regulator in a TO-263 package, and supporting passive components. The SLVP207 PCB is designed to accommodate multiple (...)

PMP2187 — 适用于医疗封装的反激式、线性稳压器 (5.75V@10mA)

此设计可提供隔离的 5V（两个）、3.3V、2.5V 及 -5V 输出。对于噪声敏感应用（如医学成像和数据采集），所有输出均可采用低压降 (LDO) 线性稳压器进行噪声过滤。