TPS76801-EP_TI 快速瞬态响应 1A 低压降稳压器（增强型产品）

TPS76801-EP的基本参数

制造厂商：TI
产品类别：电源管理
技术类目：线性和低压降 (LDO) 稳压器
功能描述：快速瞬态响应 1A 低压降稳压器（增强型产品）
点击这里打开及下载TPS76801-EP的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

TPS76801-EP的产品详情：

This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T_J = 25°C.

Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76801-EP的优势和特性：

1-A Low-Dropout Voltage Regulator
Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable Versions
Dropout Voltage Down to 230 mV at 1 A (TPS76850)
Ultralow 85-μA Typical Quiescent Current
Fast Transient Response
2% Tolerance Over Specified Conditions for Fixed-Output Versions
Open Drain Power Good (See TPS767xx for Power-On Reset With 200-ms Delay Option)
20-Pin TSSOP (PWP) PowerPAD? Package
Thermal Shutdown Protection
SUPPORTS DEFENSE, AEROSPACE AND MEDICAL APPLICATION
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C) Temperature Range
- Extended Product LIfe Cycle
- Extended Product-Change Notification
- Product Traceability

Additional temperature ranges are available - contact factory. PowerPAD is a trademark of Texas Instruments.

TPS76801-EP的参数（英文）：

Output options
Adjustable Output
Iout (Max) (A)
1
Vin (Max) (V)
10
Vin (Min) (V)
2.7
Vout (Max) (V)
5.5
Vout (Min) (V)
1.2
Fixed output options (V)
0
Noise (uVrms)
55
Iq (Typ) (mA)
0.08
Thermal resistance θJA (°C/W)
57.9
Rating
HiRel Enhanced Product
Load capacitance (Min) (μF)
10
Regulated outputs (#)
1
Features
Enable, Power good
Accuracy (%)
2
PSRR @ 100 KHz (dB)
29
Dropout voltage (Vdo) (Typ) (mV)
230
Operating temperature range (C)
-40 to 125, -55 to 125

TPS76801-EP具体的完整产品型号参数及价格（美元）：

TPS76801-EP的完整型号有：TPS76801MPWPREP、TPS76801QPWPREP、V62/03632-01XE、V62/03632-10XE，以下是这些产品的关键参数及官网采购报价：

TPS76801MPWPREP，工作温度：-55 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS76801MPWPREP的批量USD价格：2.885（1000+）

TPS76801QPWPREP，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS76801QPWPREP的批量USD价格：2.509（1000+）

V62/03632-01XE，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/03632-01XE的批量USD价格：2.509（1000+）

V62/03632-10XE，工作温度：-55 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/03632-10XE的批量USD价格：2.885（1000+）

TPS76801-EP的评估套件：

TPS76801-EP的电路图解：

TPS76801-EP的评估套件：