- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：线性和低压降 (LDO) 稳压器
- 功能描述：快速瞬态响应 1A 低压降稳压器（增强型产品）
- 点击这里打开及下载TPS76833-EP的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ = 25°C.
Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.
- 1-A Low-Dropout Voltage Regulator
- Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable Versions
- Dropout Voltage Down to 230 mV at 1 A (TPS76850)
- Ultralow 85-μA Typical Quiescent Current
- Fast Transient Response
- 2% Tolerance Over Specified Conditions for Fixed-Output Versions
- Open Drain Power Good (See TPS767xx for Power-On Reset With 200-ms Delay Option)
- 20-Pin TSSOP (PWP) PowerPAD? Package
- Thermal Shutdown Protection
- SUPPORTS DEFENSE, AEROSPACE AND MEDICAL APPLICATION
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C) Temperature Range
- Extended Product LIfe Cycle
- Extended Product-Change Notification
- Product Traceability
Additional temperature ranges are available - contact factory. PowerPAD is a trademark of Texas Instruments.
- Output options
- Fixed Output
- Iout (Max) (A)
- 1
- Vin (Max) (V)
- 10
- Vin (Min) (V)
- 2.7
- Vout (Max) (V)
- 3.3
- Vout (Min) (V)
- 3.3
- Fixed output options (V)
- 3.3
- Noise (uVrms)
- 55
- Iq (Typ) (mA)
- 0.08
- Thermal resistance θJA (°C/W)
- 57.9
- Rating
- HiRel Enhanced Product
- Load capacitance (Min) (μF)
- 10
- Regulated outputs (#)
- 1
- Features
- Enable, Power good
- Accuracy (%)
- 2
- PSRR @ 100 KHz (dB)
- 29
- Dropout voltage (Vdo) (Typ) (mV)
- 350
- Operating temperature range (C)
- -40 to 125
TPS76833-EP的完整型号有：TPS76833QPWPREP、V62/03632-08XE，以下是这些产品的关键参数及官网采购报价：
TPS76833QPWPREP，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS76833QPWPREP的批量USD价格：2.834（1000+）
V62/03632-08XE，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/03632-08XE的批量USD价格：2.834（1000+）
TPS76833QPWPREP，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS76833QPWPREP的批量USD价格：2.834（1000+）
V62/03632-08XE，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/03632-08XE的批量USD价格：2.834（1000+）
