The TPS92001/2 family of general LED lighting PWM controllers contains control and drive circuitry required for off-line isolated or non-isolated LED lighting applications.

The controllers can support Phase Cut TRIAC dimming with minimal external components. The controllers can also be implemented for stage conversion where the power factor (PF) exceeds regulatory requirements for lighting. These controllers also have an accessible 5-V reference that could be used to power a microcontroller or other low power peripheral components. The controllers operate in fixed frequency current mode switching with minimal external parts count. Internally implemented circuits include undervoltage lockout featuring startup current less than 100 μA, logic to ensure latched operation, a PWM comparator, and a totem pole output stage to sink or source peak current. The output stage, suitable for driving N-Channel MOSFETs, is low in the off state. Oscillator frequency and maximum duty cycle are programmed with two resistors and a capacitor.

The TPS92001/2 family also features full cycle soft start. The family offers UVLO thresholds and hysteresis levels for off-line and DC-to-DC systems. The TPS92001/2 is offered in the 8-pin MSOP (DGK) and 8-pin SOIC (D) packages. The small MSOP package makes the device ideally suited for applications where board

• Ideal for Single Stage Designs
• Supports Isolated and Non-Isolated Topologies
• Phase-Cut TRIAC Dimmable
• Few External Components Mode Operation
• Wide Duty Cycle Range for Wide-Input Voltage or Dimming Range
• Convenient 5-V Reference Output
• Undervoltage Lockout for Safe Operation
• Operation to 1-MHz
• 0.4-A Source/0.8-A Sink FET Driver
• Low 100-μA Startup Current
• APPLICATIONS
  • Residential LED Lighting Drivers for A19 E12/E26/27, GU10, MR16, PAR30/38 Integral Lamps
  • Drivers for Wall Sconces, Pathway Lighting and Overhead Lighting
  • Drivers for Wall Washing, Architectural and Display Lighting

• Input voltage (type)
• AC/DC
• Topology
• Boost, Buck, Flyback
• Vin (Min) (V)
• 12
• Vin (Max) (V)
• 21
• Iout (Max) (A)
• 2
• Iq (Typ) (mA)
• 0.6
• Features
• Adjustable Switch Frequency, Soft Start
• Operating temperature range (C)
• -40 to 105
• Dimming method
• Analog

TPS92001的完整型号有：TPS92001D、TPS92001DGKR、TPS92001DR，以下是这些产品的关键参数及官网采购报价：

TPS92001D，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS92001D的批量USD价格：0.541（1000+）

TPS92001DGKR，工作温度：-40 to 105，封装：VSSOP (DGK)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS92001DGKR的批量USD价格：0.451（1000+）

TPS92001DR，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS92001DR的批量USD价格：0.451（1000+）

TPS92001EVM-628 — 用于具有 10V 启动阈值的通用 PWM 控制器（用于 LED 照明）的评估模块

The Texas Instruments TPS92001EVM-628 evaluation module (EVM) helps designers evaluate the performance of the TPS92001 General Purpose PWM Controller with 10V Turn-on Threshold for LED Lighting. The EVM is a constant current dimmable LED driver. It is designed to drive 9 LEDs at 330mA and is rated (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

PMP6648 — 离线式 10 瓦升压 LED 驱动器（可调光）

在 PFC 升压配置中驱动的 HVHB LED 具有外形小巧、高 PFC、高效、低成本和低复杂性等优势。该参考设计可进行 Triac 调光、接收通用交流电，并能在 10W 功率下驱动 3 个高压 LED。