The TPS92391 is an automotive high-efficiency LED driver with boost controller. The Six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I²C interface or PWM input.

The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the TPS92391 to avoid disturbance for AM radio band.

The TPS92391 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.

• Input voltage operating range 3 V to 48 V
• Six high-precision current sinks
  • Up to 200-mA DC current for each current sink
  • Current matching 1% (typical)
  • Dimming ratio 32 000:1 using 152-Hz LED output PWM frequency
  • Up to 16-bit LED dimming resolution with I2C, or PWM input
  • 8 Configurable LED strings configuration
• Auto-phase shift PWM dimming
• 12-bit Analog dimming
• Switching frequency 100 kHz to 2.2 MHz
• Boost spread spectrum for reduced EMI
• Boost sync input to set boost switching frequency from an external clock
• Up to 48-V VOUT boost or SEPIC DC/DC controller
  • Switching frequency 100 kHz to 2.2 MHz
  • Boost spread spectrum for reduced EMI
  • Boost sync input to set boost switching frequency from an external clock
• Extensive fault diagnostics

• Number of channels (#)
• 6
• Vin (Min) (V)
• 3
• Vin (Max) (V)
• 48
• Vout (Min) (V)
• 1
• Switching frequency (Max) (kHz)
• 2200
• LED current per channel (mA)
• 200
• Topology
• Boost, Current Sink
• Features
• Adjustable Switch Frequency, Analog Dimming, Analog/PWM Mixed Dimming, Enable/Shutdown, Fault Detection, I2C Control, OVP, PWM Control, Programmable output current, Soft Start, Thermal Shutdown
• Operating temperature range (C)
• -40 to 125

TPS92391的完整型号有：TPS92391RHBR，以下是这些产品的关键参数及官网采购报价：

TPS92391RHBR，工作温度：-40 to 125，封装：VQFN (RHB)-32，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS92391RHBR的批量USD价格：1.365（1000+）

LP8866EVM — LP8866-Q1 6-Channel Automotive Display LED Driver Evaluation Module

The LP8866EVM helps designers to evaluate the characteristics, operation, and performance of the LP8866(S)-Q1 device, a 6-channel high-efficiency LED driver for automotive display LED backlighting. The LP8866(S)-Q1 device integrates a boost or SEPIC controller and six high-precision current sinks. (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)