The TPS92692 and TPS92692-Q1 are high accuracy peak current mode based controllers designed to support step-up/down LED driver topologies. The device incorporates a rail-to-rail current amplifier to measure LED current and spread spectrum frequency modulation technique for improved EMI performance.

This high performance LED controller can independently modulate LED current using either analog or PWM dimming techniques. Linear analog dimming response with over 15:1 range is obtained by varying the voltage across the high impedance analog adjust (IADJ) input. PWM dimming of LED current is achieved by directly modulating the DIM/PWM input pin with the desired duty cycle or by enabling the internal PWM generator circuit. The PWM generator translates the DC voltage at DIM/PWM pin to corresponding duty cycle by comparing it to the internal triangle wave generator. The optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET.

The TPS92692 and TPS92692-Q1 devices support continuous LED status check through the current monitor (IMON) output. The devices also include an open drain fault indicator output to indicate LED overcurrent, output overvoltage and output undervoltage conditions.

• Wide Input Voltage: 4.5 V to 65 V
• Better than ± 4% LED Current Accuracy over –40°C to 150°C Junction Temperature Range
• Spread Spectrum Frequency Modulation for Improved EMI
• Comprehensive Fault Protection Circuitry with Current Monitor output and Open Drain Fault Flag Indicator
• Internal Analog Voltage to PWM Duty Cycle Generator for stand-alone Dimming Operation
• Compatible with Direct PWM Input with over 1000:1 Dimming Range
• Analog LED Current Adjust Input (IADJ) with over 15:1 Contrast Ratio
• Integrated P-Channel Driver to enable Series FET Dimming and LED Protection
• TPS92692-Q1: Automotive Q100 Grade 1 Qualified

• Number of channels (#)
• 1
• Topology
• Boost Controller, Buck Controller, Buck-Boost Controller, Cuk Controller, Flyback Controller, Sepic Controller
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 125
• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 65
• Vout (Min) (V)
• 3
• Vout (Max) (V)
• 65
• Iout (Max) (A)
• 5
• Iq (Typ) (mA)
• 1.8
• Switching frequency (Max) (kHz)
• 800
• Features
• Adjustable Switch Frequency, Fault Detection, LED Open Detection, LED Short to Ground Detection, Precision Dimming Control, Soft Start, Spread Spectrum, Synchronization Pin, Thermal Shutdown

TPS92692-Q1的完整型号有：TPS92692QPWPRQ1、TPS92692QPWPTQ1，以下是这些产品的关键参数及官网采购报价：

TPS92692QPWPRQ1，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS92692QPWPRQ1的批量USD价格：.813（1000+）

TPS92692QPWPTQ1，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS92692QPWPTQ1的批量USD价格：.976（1000+）

TPS92692EVM-880 — TPS92692-Q1 升压和升压至电池 LED 驱动器评估模块

TPS92692EVM-880 是经过全面组装和测试的 LED 驱动器，可配置为升压或升压到电池拓扑，以为单串串联 LED 供电。它可以使用低偏移轨至轨电流感应放大器及高侧电流感应实施来实现精确的闭环 LED 电流调节。可以使用高阻抗模拟调节 (IADJ) 输入以 15:1 的比率改变直流 LED 电流设置点。可以通过借助所需占空比直接调制 PWM/DIM 输入引脚或通过启用内部 PWM 发生器电路来实现 LED 电流的 PWM 调光。可选 PDRV 栅极驱动器输出可用于驱动外部 P 通道系列 MOSFET。

TPS92692/-Q1 支持通过电流监视器 (IMON) 输出进行连续 LED (...)

TPS92692-Q1 Boost and Buck Boost PSpice Transient Model (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TPS92692-Q1 Buck-Boost Design Calculator

此参考设计描述了双模式远近光应用中采用单个控制器和功率级的 TPS92692-Q1 LED 驱动器。此设计在升压模式下运行时提供远光，在升压到电池模式下运行时提供近光。单控制器功率级设计实现了更简单、更具有成本效益的照明系统。TPS92692 器件的其他设计灵活性包括模拟和 PWM 调光支持，以及内置监测功能，以便进行故障检测和提供连续 LED 电流保护。此设计包含 EMI 滤波功能，旨在满足 CISPR-25 5 类传导要求。

TIDA-01581 — 具有电流均衡功能的汽车日间行车灯双灯串 LED 驱动器参考设计

This reference design is a dual string LED driver that implements an operational amplifier based circuit which balances the current in two LED rings. The operational amplifier circuit senses current in a reference string and uses feedback from a mirrored string to bias a MOSFET that egulates the (...)