The TPSM41625 power module is an easy-to-use integrated power supply that combines a DC/DC converter with power MOSFETs, a shielded inductor, and passives into a compact QFN package. This power solution requires few external components while maintaining the ability to adjust key parameters to meet specific design requirements. Applications requiring increased current can benefit from the ability to parallel two TPSM41625 devices.

The 11-mm × 16-mm × 4.2-mm, 69-pin QFN package with optimal package layout has excellent power dissipation capability which enhances thermal performance. The package footprint has all signal pins accessible from the perimeter and large thermal pads beneath the device. The TPSM41625 offers flexibilty with many features including power good signal, clock synchronization, programmable UVLO, soft-start timing selection, prebias start-up, as well as overcurrent and overtemperature protection making it a great product for powering a wide range of devices and systems.

space

space

space

• Integrated inductor power solution
• 11-mm × 16-mm × 4.2-mm QFN package
  • All pins accessible from package perimeter
• Input voltage range: 4 V to 16 V
• Wide-output voltage range: 0.6 V to 7.1 V
• Selectable internal reference (±0.5% accuracy)
• Stackable up to two devices
  • Parallel outputs for higher current
  • Phase-interleaving for reduced ripple
• Efficiencies up to 97%
• Adjustable fixed switching frequency (300 kHz to 1 MHz)
• Allows synchronization to an external clock
• Advanced current mode provides ultra-fast load step response
• Power-good output
• Meets EN55011 radiated EMI limits
• Operating ambient range: –40°C to +105°C
• Operating IC junction range: –40°C to +125°C
• Pin compatible with: 15-A TPSM41615
• Create a custom design using the TPSM41625 With the WEBENCH Power Designer

• Iout (Max) (A)
• 25
• Vin (Min) (V)
• 4
• Vin (Max) (V)
• 16
• Vout (Min) (V)
• 0.6
• Vout (Max) (V)
• 7.1
• Soft start
• Adjustable
• Features
• Current Sharing, EMI Tested, Frequency Synchronization, Phase Interleaving, Power Good, Remote Sense
• Iq (Typ) (uA)
• 4300
• Regulated outputs (#)
• 1
• Switching frequency (Max) (kHz)
• 1000
• Switching frequency (Min) (kHz)
• 300
• Topology
• Buck, Synchronous Buck

TPSM41625的完整型号有：TPSM41625MOVR，以下是这些产品的关键参数及官网采购报价：

TPSM41625MOVR，工作温度：-40 to 125，封装：QFM (MOV)-69，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIAU，TI官网TPSM41625MOVR的批量USD价格：13.65（1000+）

TPSM41625-2X-EVM — 并联、4V 至 16V 输入、0.6V 至 7.1V 输出、2 X 25A 电源模块评估板

TPSM41625-2X-EVM 评估模块 (EVM) 经过相应配置，可在高达 50A 的电流范围内评估两个 TPSM41625 电源模块的并行运行情况。输入电压范围为 4V 至 16V。输出电压范围为 0.6V 至 7.1V。利用该评估板可轻松评估 TPSM41625 的并行运行情况。

TPSM41625EVM — 4V 至 16V 输入、0.6V 至 7.1V 输出、25A 电源模块评估板

TPSM41625 评估板 (EVM) 用于在高达 25A 的电流范围内评估 TPSM41625 电源模块的运行情况。输入电压范围为 4V 至 16V，输出电压范围为 0.6V 至 7.1V。利用该评估板可轻松评估 TPSM41625 的运行情况。

TPSM41625 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)