The TS3DV421 is a 4-channel differential 2:1 multiplexer/demultiplexer digital video switch controlled with one select input (SEL). SEL controls the data path of the multiplexer/demultiplexer and can be connected to any GPIO in the system, using an external voltage divider system. The device provides high bandwidth necessary for DVI and HDMI applications. This device expands the high-speed physical link interface from a single HDMI port to two HDMI ports (A or B port). The unselected channel is set to a high-impedance state.

The most common application for the TS3DV421 is in the sink application. In this case, there are two sources (i.e., DVD, set-top box, or game console) that must be routed to one HDMI receiver. The TS3DV421 can route the signals where one HDMI receiver (in a DLP, LCD TV, PDP, or other high-definition display) can be expanded to three ports.

The HDMI application calls for a 100- differential impedance between the differential lines (TMDSn+ and TMDSn–). Additionally, because the TS3DV421 is a high-bandwidth, low-r_ON pass transistor-type switch, a properly designed board retains a 100- differential impedance through the switch. The unselected port is in the high-impedance mode, such that the receiver receives information from only one source. HDCP encryption is passed through the switch for the HDMI receiver to decode.

• Compatible With HDMI v1.3 DVI 1.0 High-Speed Digital Interface
  • Wide Bandwidth of Over 3.8 Gbps
  • Serial Data Stream at 10× Pixel Clock Rate
  • Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz)
  • High Bandwidth of 4.95 Gbps (Single Link)
  • HDCP Compatible
• Low Crosstalk (XTALK = –50 dB Typ at 1.65 Gbps)
• Off Isolation (OIRR = –50 dB Typ at 1.65 Gbps)
• Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
• Low and Flat ON-State Resistance (rON = 12.5 Max, rON(flat) = 0.5 Typ)
• Low Input/Output Capacitance (CON = 4.5 pF Max)
• Enables Application-Specific Operating Voltage Selection
  • VDD Operating Range From 1.5 V to 2.1 V When VSS = GND
  • VDD Operating Range From 3.0 V to 3.6 V When VSS = 1.5 V
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• For DisplayPort Applications: VDD = 1.8 V , VSS = GND
• For HDMI/DVI Applications: VDD = 3.3 V , VSS = 1.5 V
• APPLICATIONS
  • DVI/HDMI Signal Switching
  • Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers and High-Definition Televisions (HDTVs)

All other trademarks are the property of their respective owners.

• Protocols
• DVI, HDMI, LVDS, SXGA, TMDS, VGA
• Speed (Max) (Gbps)
• 4.9
• Supply voltage (V)
• 1.8
• Operating temperature range (C)
• -40 to 85

TS3DV421的完整型号有：TS3DV421DGVR、TS3DV421RUAR，以下是这些产品的关键参数及官网采购报价：

TS3DV421DGVR，工作温度：-40 to 85，封装：TVSOP (DGV)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3DV421DGVR的批量USD价格：.458（1000+）

TS3DV421RUAR，工作温度：-40 to 85，封装：WQFN (RUA)-42，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网TS3DV421RUAR的批量USD价格：.504（1000+）

HSPICE Model for TS3DV421

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)