The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching. This device can also be used to replace mechanical relays in LAN applications and allows for signals to be routed from a 10/100/1000 Base-T transceiver to the RJ-45 connectors in laptops or docking stations.

This device provides low and flat ON-state resistance (r_on) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

• Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface
  • Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ)
  • 165-MHz Speed Operation
  • Serial Data Stream at 10× Pixel Clock Rate
  • Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz)
  • Total Raw Capacity 4.95 Gbps (Single Link)
  • HDCP Compatible
• Low Crosstalk (XTALK = –41 dB Typ)
• Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
• Low and Flat ON-State Resistance(ron = 6 Max, ron(flat) = 0.5 Typ)
• Low Input/Output Capacitance(CON = 7.8 pF Typ)
• Rail-to-Rail Switching on Data I/O Ports (0 to 5 V)
• VCC Operating Range From 3 V to 3.6 V
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• APPLICATIONS
  • DVI/HDMI Signal Switching
  • Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers and High-Definition Televisions (HDTVs)
  • 10/100/1000 Base-T Signal Switching
  • Hub and Router Signal Switching

• Protocols
• DVI, HDMI, LVDS, SXGA, TMDS, VGA
• Speed (Max) (Gbps)
• 4.9
• Supply voltage (V)
• 3.3
• Operating temperature range (C)
• -40 to 85

TS3DV520的完整型号有：TS3DV520ERHUR、TS3DV520RHUR，以下是这些产品的关键参数及官网采购报价：

TS3DV520ERHUR，工作温度：-40 to 85，封装：WQFN (RHU)-56，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网TS3DV520ERHUR的批量USD价格：.731（1000+）

TS3DV520RHUR，工作温度：-40 to 85，封装：WQFN (RHU)-56，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3DV520RHUR的批量USD价格：1.035（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)