- 制造厂商：TI
- 产品类别：开关与多路复用器
- 技术类目：特定于协议的开关和多路复用器
- 功能描述：3.3V、2:1 (SPDT)、4 通道 LAN 开关
- 点击这里打开及下载TS3L100的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The TI TS3L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E)\ input. When E\ is low, the switch is enabled and the I port is connected to the Y port. When E\ is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, E\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- Wide Bandwidth (BW = 350 MHz Min)
- Low Differential Crosstalk (XTALK = –68 dB Typ)
- Low Power Consumption (ICC = 10 μA Max)
- Bidirectional Data Flow, With Near-Zero Propagation Delay
- Low ON-State Resistance (ron = 5 Typ)
- Rail-to-Rail Switching on Data I/O Ports (0 to VCC)
- VCC Operating Range From 3 V to 3.6 V
- Ioff Supports Partial-Power-Down Mode Operation
- Data and Control Inputs Have Undershoot Clamp Diodes
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
- Suitable for Both 10 Base-T/100 Base-T Signaling
- Protocols
- 10 BASE-T, 100 BASE-T, LAN
- Configuration
- 2:1 SPDT
- Number of channels (#)
- 4
- Bandwidth (MHz)
- 350
- Supply voltage (Max) (V)
- 3.6
- Supply voltage (Min) (V)
- 3
- Ron (Typ) (Ohms)
- 10
- Input/ouput voltage (Min) (V)
- 0
- Input/ouput voltage (Max) (V)
- 3.6
- Supply current (Typ) (uA)
- 0.1
- ESD HBM (Typ) (kV)
- 2
- Operating temperature range (C)
- 0 to 70
- Crosstalk (dB)
- -68
- ESD CDM (kV)
- 1
- ICC (Typ) (uA)
- 0.1
- Input/output continuous current (Max) (mA)
- 128
- COFF (Typ) (pF)
- 10
- CON (Typ) (pF)
- 3
- Off isolation (Typ) (dB)
- -42
- OFF-state leakage current (Max) (μA)
- 1
- Propagation delay (ns)
- 7.5
- Ron (Max) (Ohms)
- 15
- Ron channel match (Max) (Ohms)
- 1
- RON flatness (Typ) (Ohms)
- 1
- Turn off time (disable) (Max) (ns)
- 3.5
- Turn on time (enable) (Max) (ns)
- 7.5
- VIH (Min) (V)
- 2
- VIL (Max) (V)
- 0.8
TS3L100的完整型号有：TS3L100DBQR、TS3L100DGVR、TS3L100DR、TS3L100PW、TS3L100PWR、TS3L100RGYR，以下是这些产品的关键参数及官网采购报价：
TS3L100DBQR，工作温度：0 to 70，封装：SSOP (DBQ)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100DBQR的批量USD价格：.719（1000+）
TS3L100DGVR，工作温度：0 to 70，封装：TVSOP (DGV)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100DGVR的批量USD价格：.719（1000+）
TS3L100DR，工作温度：0 to 70，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100DR的批量USD价格：.719（1000+）
TS3L100PW，工作温度：0 to 70，封装：TSSOP (PW)-16，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100PW的批量USD价格：.863（1000+）
TS3L100PWR，工作温度：0 to 70，封装：TSSOP (PW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100PWR的批量USD价格：.719（1000+）
TS3L100RGYR，工作温度：0 to 70，封装：VQFN (RGY)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TS3L100RGYR的批量USD价格：.719（1000+）
LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器
EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。
LEADLESS-ADAPTER1 — 用于测试 TI 6、8、10、12、14、16 和 20 引脚无引线封装的表面贴装转 DIP 接头适配器
EVM-LEADLESS1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 DRC、DTP、DQE、RBW、RGY、RSE、RSV、RSW、RTE、RTJ、RUK、RUC、RUG、RUM、RUT 和 YZP 表面贴装封装转换为 100mil DIP 接头。
