The TS5A22364 is a bidirectional, 2-channel, single-pole double-throw (SPDT) analog switch designed to operate from 2.3 V to 5.5 V. The device features negative signal capability that allows signals below ground to pass through the switch without distortion. Additionally, the TS5A22364 includes an internal shunt switch, which automatically discharges any capacitance at the NC or NO terminals when they are unconnected to COM. This reduces the audible click/pop noise when switching between two sources. The break-before-make feature prevents signal distortion during the transferring of a signal from one path to another. Low ON-state resistance, excellent channel-to-channel ON-state resistance matching, and minimal total harmonic distortion (THD) performance are ideal for audio applications. The 3.00-mm x 3.00-mm DRC package is also available as a nonmagnetic package for medical imaging applications.

• Specified Break-Before-Make Switching
• Negative Signaling Capability: Maximum Swing from –2.75 V to 2.75 V (VCC = 2.75 V)
• Internal Shunt Switch Prevents Audible Click-and-Pop When Switching Between Two Sources
• Low ON-State Resistance (0.65 ? Typical)
• Low Charge Injection
• Excellent ON-State Resistance Matching
• 2.3-V to 5.5-V Power Supply (VCC)
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2500-V Human-Body Model (A114-B, Class II)
  • 1500-V Charged-Device Model (C101)
  • 200-V Machine Model (A115-A)

• Protocols
• Analog Audio
• Configuration
• 2:1 SPDT
• Number of channels (#)
• 2
• Bandwidth (MHz)
• 18.3
• Supply voltage (Max) (V)
• 5.5
• Supply voltage (Min) (V)
• 2.3
• Ron (Typ) (Ohms)
• 0.52
• Input/ouput voltage (Min) (V)
• -3.2
• Input/ouput voltage (Max) (V)
• 5.5
• Supply current (Typ) (uA)
• 0.1
• ESD HBM (Typ) (kV)
• 1.5
• Operating temperature range (C)
• -40 to 85
• Crosstalk (dB)
• -78
• ESD CDM (kV)
• 1.5
• ICC (Typ) (uA)
• 0.2
• Input/output continuous current (Max) (mA)
• 350
• CON (Typ) (pF)
• 370
• Off isolation (Typ) (dB)
• -70
• Ron (Max) (Ohms)
• 1.3
• Ron channel match (Max) (Ohms)
• 0.3
• RON flatness (Typ) (Ohms)
• 0.076
• Turn off time (disable) (Max) (ns)
• 70
• Turn on time (enable) (Max) (ns)
• 120
• VIH (Min) (V)
• 1.4
• VIL (Max) (V)
• 0.8

TS5A22364的完整型号有：TS5A22364DGSR、TS5A22364DRCR、TS5A22364YZPR，以下是这些产品的关键参数及官网采购报价：

TS5A22364DGSR，工作温度：-40 to 85，封装：VSSOP (DGS)-10，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS5A22364DGSR的批量USD价格：.357（1000+）

TS5A22364DRCR，工作温度：-40 to 85，封装：VSON (DRC)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TS5A22364DRCR的批量USD价格：.357（1000+）

TS5A22364YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TS5A22364YZPR的批量USD价格：.393（1000+）

LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器

EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。

LEADLESS-ADAPTER1 — 用于测试 TI 6、8、10、12、14、16 和 20 引脚无引线封装的表面贴装转 DIP 接头适配器

EVM-LEADLESS1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 DRC、DTP、DQE、RBW、RGY、RSE、RSV、RSW、RTE、RTJ、RUK、RUC、RUG、RUM、RUT 和 YZP 表面贴装封装转换为 100mil DIP 接头。