The TS5V330C is a 4-bit 1-of-2 multiplexer/demultiplexer video switch with a single switch-enable (EN) input. The select (IN) input controls the data path of the multiplexer/demultiplexer. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and a high impedance state exists between the D and S ports.

Low differential gain and phase makes this switch ideal for video applications. The device has a wide bandwidth and low cross talk which makes it suitable for high frequency video applications. The device can be used for RGB and composite video switching applications.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, EN should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Low Differential Gain and Phase (Typical DG = 0.24%, Typical DP = 0.039°)
• Wide Bandwidth (Typical BW > 288 MHz)
• Low Cross-Talk (Typical XTALK = –87 dB)
• Low Power Consumption (Maximum ICC = 3 μA)
• Bidirectional Data Flow, With Near-Zero Propagation Delay
• Low ON-State Resistance (Typical rON = 3 )
• VCC Operating Range From 4.5 V to 5.5 V
• Ioff Supports Partial-Power-Down Mode Operation
• Data and Control Inputs Provide Undershoot Clamp Diode
• Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• Suitable for Both RGB and Composite Video Switching

• Protocols
• RGB, Composite
• Configuration
• 1:2 SPDT
• Number of channels (#)
• 4
• Bandwidth (MHz)
• 250
• Supply voltage (Max) (V)
• 5.5
• Supply voltage (Min) (V)
• 4
• Ron (Typ) (Ohms)
• 3
• Input/ouput voltage (Min) (V)
• 0
• Input/ouput voltage (Max) (V)
• 5.5
• ESD HBM (Typ) (kV)
• 2
• Operating temperature range (C)
• -40 to 85
• Crosstalk (dB)
• -87
• ESD CDM (kV)
• 1
• Input/output continuous current (Max) (mA)
• 128
• COFF (Typ) (pF)
• 5.5
• CON (Typ) (pF)
• 16.5
• Off isolation (Typ) (dB)
• -54
• OFF-state leakage current (Max) (μA)
• 10
• Propagation delay (ns)
• 6
• Ron (Max) (Ohms)
• 10
• Turn off time (disable) (Max) (ns)
• 5.9
• Turn on time (enable) (Max) (ns)
• 6
• VIH (Min) (V)
• 2
• VIL (Max) (V)
• 0.8

TS5V330C的完整型号有：TS5V330CDBQR、TS5V330CDR、TS5V330CPWR，以下是这些产品的关键参数及官网采购报价：

TS5V330CDBQR，工作温度：-40 to 85，封装：SSOP (DBQ)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TS5V330CDBQR的批量USD价格：.17（1000+）

TS5V330CDR，工作温度：-40 to 85，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS5V330CDR的批量USD价格：.17（1000+）

TS5V330CPWR，工作温度：-40 to 85，封装：TSSOP (PW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TS5V330CPWR的批量USD价格：.121（1000+）

LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器

EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。