The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The TUSB1105 and TUSB1106 can be used as USB device transceivers or USB host transceivers.

The devices allow USB application-specific ICs (ASICs) and programmable logic devices (PLDs), with power-supply voltages from 1.65 V to 3.6 V, to interface with the physical layer (PHY) of the universal serial bus. They have an integrated 5-V to 3.3-V voltage regulator for direct powering via the USB supply VBUS.

The TUSB1105 allows single-ended and differential input modes selectable by a mode (MODE) input and is available in RGT and RTZ packages. The TUSB1106 allows only differential input mode and is available in PW, RGT, RSV, and RTZ packages.

The TUSB1105 and TUSB1106 are ideal for portable electronic devices, such as mobile phones, personal digital assistants, information appliances, and digital still cameras.

• Compatible With Universal Serial Bus Specification Rev. 2.0
• Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s) and Low-Speed (1.5-Mbit/s) Data Rates
• Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering Via USB VBUS
• VBUS Disconnection Indication Through VP and VM
• Used as USB Device Transceiver or USB Host Transceiver
• Stable RCV Output During SE0 Condition
• Two Single-Ended Receivers With Hysteresis
• Low-Power Operation, Ideal for Portable Equipment
• Support I/O Voltage Range From 1.65 V to 3.6 V
• IEC-61000-4-2 ESD Compliant
  • ±9-kV Contact-Discharge Model (D+, D–, VCC(5.0))
  • ±15-kV Human-Body Model (D+, D–, VCC(5.0))
• TUSB1105 Available in Quad Flat No-Lead (QFN) Package; TUSB1106 Available in QFN and Thin Shrink Small-Outline Package (TSSOP)
• APPLICATIONS
  • Mobile Phones
  • Personal Digital Assistants (PDAs)
  • Information Appliances (IAs)
  • Digital Still Cameras (DSCs)

• Function
• USB2
• USB speed (Mbps)
• 12
• Supply voltage (V)
• 5
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

TUSB1105的完整型号有：TUSB1105RGTR、TUSB1105RTZR，以下是这些产品的关键参数及官网采购报价：

TUSB1105RGTR，工作温度：-40 to 85，封装：VQFN (RGT)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TUSB1105RGTR的批量USD价格：0.753（1000+）

TUSB1105RTZR，工作温度：-40 to 85，封装：WQFN (RTZ)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TUSB1105RTZR的批量USD价格：0.753（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)