The TUSB216 is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.

The TUSB216 leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boost function. In addition, the TUSB216 includes a pre-equalization function to improve the receiver sensitivity and compensate the inter-symbol interference (ISI) jitter in application with longer cable length. USB low-speed and full-speed signal characteristics are unaffected by the TUSB216.

The TUSB216 improves signal quality without altering packet timing or adding propagation delay or latency.

The TUSB216 helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters.

The TUSB216 is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled via a control pin.

• Wide supply voltage range: 2.3 - 6.5 V
• Ultra-low USB disconnect and shutdown power consumption
• Provides USB 2.0 high-speed signal conditioning
• Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Support for low-speed, full-speed, high-speed signaling
• Integrated BC 1.2 CDP battery charging controller
• Host/Device agnostic
• Supports up to 5-m cable length
  • Four selectable signal boost (edge boost along with DC boost) settings via external pull-down resistor values
  • Three selectable RX sensitivity settings via pull-up-or-down to compensate ISI jitter for high-loss applications
• Supports up to 10-m cable length with two TUSB216 devices
• Scalable solution - devices can be daisy chained for high loss applications
• Pin compatible with TUSB211/212/214 (3.3V)

• Type
• Redriver
• Function
• USB2
• USB speed (Mbps)
• 480
• Number of channels (#)
• 1
• Supply voltage (Max) (V)
• 6.5
• Supply voltage (Min) (V)
• 2.3
• Input/ouput voltage (Min) (V)
• 0
• Input/ouput voltage (Max) (V)
• 3.6
• Configuration
• USB 2.0 Single-channel
• Features
• USB 2.0 high-speed signal conditioning , Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70
• ICC (Max) (uA)
• 36mA
• ESD HBM (Typ) (kV)
• 2
• Bandwidth (MHz)
• 240

TUSB216的完整型号有：TUSB216RWBR、TUSB216RWBT，以下是这些产品的关键参数及官网采购报价：

TUSB216RWBR，工作温度：0 to 70，封装：X2QFN (RWB)-12，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB216RWBR的批量USD价格：1.672（1000+）

TUSB216RWBT，工作温度：0 to 70，封装：X2QFN (RWB)-12，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB216RWBT的批量USD价格：2.006（1000+）

TUSB216EVM — TUSB216EVM User's Guide

The TUSB216 evaluation module (EVM) can be used to evaluate the signal conditioning abilities of the TUSB216 device for various applications.

TUSB216 S-Parameter Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)