The TUSB8020B-Q1 is a two-port USB 3.0 compliant hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/low-speed connections, SuperSpeed USB and high-speed connectivity are disabled on the downstream ports.

The TUSB8020B-Q1 supports per port or ganged power switching and over-current protection, and supports battery charging applications.

An individually port power controlled hub switches power on or off to each downstream port as requested by the USB host. Also when an individually port power controlled hub senses an over-current event, only power to the affected downstream port will be switched off.

A ganged hub switches on power to all its downstream ports when power is required to be on for any port. The power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed. Also when a ganged hub senses an over-current event, power to all downstream ports will be switched off.

The TUSB8020B-Q1 downstream ports provide support for battery charging applications by providing USB Battery Charging 1.2 Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated Charging Port (DCP) mode when the upstream port is not connected. The DCP mode supports the USB Battery Charging Specification and the Chinese Telecommunications Industry Standard YD/T 1591-2009. In addition, an automatic mode provides transparent support for BC 1.2 compliant devices and devices supporting Divider Mode charging solutions when the upstream port unconnected.

The TUSB8020B-Q1 provides terminal strap configuration for some features including battery charging support, and also provides customization though OTP ROM, I²C EEPROM or via an I²C/SMBus slave interface for PID, VID, and custom port and phy configurations. Custom string support is also available when using an I²C EEPROM or the I²C/SMBus slave interface.

The device is available in a 48-terminal HTQFP package and is designed for operation over the industrial temperature range of –40°C to 85°C.

• Two Port USB 3.0 Compliant Hub
• USB 2.0 Hub Features
  • Multi Transaction Translator (MTT) Hub: Two Transaction Translators
  • Four Asynchronous Endpoint Buffers Per Transaction Translator
• Supports USB Battery Charging Specification Revision 1.2
  • CDP Mode (Upstream Port Connected)
  • DCP Mode (Upstream Port Unconnected)
  • DCP Mode Complies with Chinese Telecommunications Industry Standard YD/T 1591-2009
• Support D+/D- Divider Mode.
• Supports Operation as a USB 3.0 or USB 2.0 Compound Device
• Per Port or Ganged Power Switching and Over-Current Notification Inputs
• OTP ROM, Serial EEPROM or I2C/SMBus Slave Interface for Custom Configurations:
  • VID and PID
  • Port Customizations
  • Manufacturer and Product Strings (not by OTP ROM)
  • Serial Number (not by OTP ROM)
• Application Feature Selection Using Terminal Selection or EEPROM/ or I2C/SMBus Slave Interface
• Provides 128-Bit Universally Unique Identifier (UUID)
• Supports On-Board and In-System OTP/EEPROM Programming Via the USB 2.0 Upstream Port
• Single Clock Input, 24-MHz Crystal or Oscillator
• No special driver requirements; works seamlessly on any operating system with USB stack support

• Function
• USB3
• USB speed (Mbps)
• 5000
• Supply voltage (V)
• 1.1, 3.3
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 85

TUSB8020B-Q1的完整型号有：TUSB8020BIPHPQ1、TUSB8020BIPHPRQ1，以下是这些产品的关键参数及官网采购报价：

TUSB8020BIPHPQ1，工作温度：-40 to 85，封装：HTQFP (PHP)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB8020BIPHPQ1的批量USD价格：4.171（1000+）

TUSB8020BIPHPRQ1，工作温度：-40 to 85，封装：HTQFP (PHP)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB8020BIPHPRQ1的批量USD价格：3.633（1000+）

TUSB8020BEVM — TUSB8020BEVM：汽车类双端口 USB 3.0 集线器评估模块

The TI TUSB8020BEVM is a functional board design of a single device that implements both a USB 3.0 hub and a USB 2.0 hub. The EVM can support both SuperSpeed (SS) and USB 2.0 (HS, FS, and LS) operation on its USB ports. This EVM is intended for use in evaluating system compatibility, developing (...)

TUSB8020B IBIS Model (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)