The TUSB9261-Q1 is an ARM cortex M3 microcontroller based Universal Serial Bus (USB) 3.0 to Serial ATA (SATA) bridge. It provides the necessary hardware and firmware to implement a USB Attached SCSI Protocol (UASP) compliant mass storage device suitable for bridging SATA compatible hard disk drives (HDD) and solid state disk drives (SSD) to a USB 3.0 bus. The firmware also implements the mass storage class bulk-only transport (BOT) for bridging optical drives and other compatible SATA devices to the USB bus. In addition to UASP and BOT support,a USB human interface device (HID) interfaces is supported for control of the general purpose input/ouput (GPIO). The SATA interface supports gen1 (1.5-Gbps) and gen2 (3.0-Gbps) for cable lengths up to 2 meters.

The device is available in a 64-pin HTQFP package and is designed for operation over the industrial temperature range of –40°C to 85°C.

• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Exceptions:
  • Device CDM ESD Classification Level C3
• Ideal for bridging Serial ATA (SATA) Devices, Such as Hard Disk Drives (HDD), Solid State Drives (SSD), or Optical Drives (OD) to Universal Serial Bus (USB)
• USB Interface
  • Integrated Transceiver Supports SS/HS/FS Signaling
  • Best in Class Adaptive Equalizer
    • Allows for Greater Jitter Tolerance in the Receiver
  • USB Class Support
    • USB Attached SCSI Protocol (UASP) for HDD and SSD
    • USB Mass Storage Class Bulk-Only Transport (BOT) Including Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)
    • USB Bootability Support
    • USB Human Interface Device (HID)
  • Supports Firmware Update Via USB Using a TI Provided Application
• SATA Interface
  • Serial ATA Specification Revision 2.6 Supporting gen1 and gen2 Data Rates
  • Supports hot plug
  • Supports Mass-Storage Devices Compatible with the ATA/ATAPI-8 Specification
• Integrated ARM Cortex M3 Core
  • Customizable Application Code Loaded From EEPROM Via SPI Interface
  • Two Additional SPI Port Chip Selects for Peripheral Connection
  • Up to 5 GPIOs for End-User Configuration via HID
  • Serial Communications Interface for Debug (UART)
• General Features
  • Integrated Spread Spectrum Clock Generation Enables Operation from a Single Low Cost Crystal or Clock Oscillator
    • Supports 20, 25, 30 or 40 MHz
  • JTAG Interface for IEEE1149.1 and IEEE1149.6 Boundary Scan
  • Available in a Fully RoHS Compliant Package (PAP)

• Function
• USB3
• USB speed (Mbps)
• 5000
• Supply voltage (V)
• 3.3, 1.1
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 85

TUSB9261-Q1的完整型号有：TUSB9261IPAPQ1、TUSB9261IPAPRQ1，以下是这些产品的关键参数及官网采购报价：

TUSB9261IPAPQ1，工作温度：-40 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB9261IPAPQ1的批量USD价格：6.126（1000+）

TUSB9261IPAPRQ1，工作温度：-40 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TUSB9261IPAPRQ1的批量USD价格：5.335（1000+）

TUSB9261DEMO — TUSB9261 demonstration kit

The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardwarefor connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)

TUSB926x Default Firmware, U1/U2 Disabled (Rev. M)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)

TIDA-00148 — 用于汽车信息娱乐系统的 USB 2.0/3.0 海量存储桥接器

此 TIDA-00148 参考设计采用 TUSB9261DEMO，允许快速评估用于汽车信息娱乐系统的 SATA 器件连接的系统兼容性。TIDA-00148 中使用的固件能够支持单一 SATA 驱动器，如固态驱动器、硬盘驱动器、DVD 驱动器和 Blu-Ray 驱动器。TUSB9261-Q1 也已针对众多器件进行全面回归测试，可加速开发过程，促进产品更快上市。