The TVP5158, TVP5157, and TVP5156 devices are 4-channel high-quality NTSC/PAL video decoders that digitize and decode all popular base-band analog video formats into digital video output. Each channel of this decoder includes 10-bit 27-MSPS A/D converter (ADC). Preceding each ADC in the device, the corresponding analog channel contains an analog circuit that clamps the input to a reference voltage and applies the gain.

Composite input signal is sampled at 2x the ITU-R BT.601 clock frequency, line-locked alignment, and is then decimated to the 1x pixel rate. CVBS decoding uses five-line adaptive comb filtering for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts. A chroma trap filter is also available. On CVBS inputs, the user can control video characteristics such as contrast, brightness, saturation, and hue via an I²C host port interface. Furthermore, luma peaking (sharpness) with programmable gain is included.

All four channels are independently controllable. These decoders share a single clock input for all channels and for all supported standards.

TVP5158 provides a glueless audio and video interface to TI DaVinci video processors. Video output ports support 8-bit ITU-R BT.656 and 16-bit 4:2:2 YCbCr with embedded synchronization. TVP5158 supports multiplexed pixel-interleaved and line-interleaved mode video outputs with metadata insertion. TVP5158 and TVP5157 integrate 4-Ch audio ADCs to reduce the BOM cost for surveillance market. Multiple TVP5158 devices can be cascade connected to support up to 8-Ch Video or 16-Ch audio processing.

Noise reduction and auto contrast functions improve the video quality under low light condition which is very critical for surveillance products.

The TVP5158, TVP5157, and TVP5156 can be programmed by using a single I²C serial interface. I²C commands can be sent to one or more decoder cores simultaneously, reducing the amount of I²C activity necessary to configure each core. This is especially useful for fast downloading modified firmware to the decoder cores.

TVP5158, TVP5157, and TVP5156 use 1.1-V, 1.8-V, and 3.3-V power supplies for the analog/digital core and I/O. These devices are available in a 128-pin TQFP package.

• Common Device Features (TVP5158, TVP5157, and TVP5156)
  • Four separate video decoder channels having the following features for each channel
    • Accepts NTSC (J, M, 4.43) and PAL (B, D, G, H, I, M, N, Nc, 60) video data
    • Composite video inputs, pseudo-differential video inputs to improved noise immunity
    • High-speed 10-bit ADC
    • Fully differential CMOS analog preprocessing channels with clamping
    • Integrated anti-aliasing filter
    • 2D 5-line (5H) adaptive comb filter
    • Noise reduction and auto contrast
    • Robust automatic video standard detection (NTSC/PAL) and switching
    • Programmable hue, saturation, sharpness, brightness, and contrast
    • Luma-peaking processing
    • Patented architecture for locking to weak, noisy, or unstable signals
  • Four independent scalers support horizontal and/or vertical 2:1 downscaling
  • Channel multiplexing capabilities with metadata insertion
    • Pixel-interleaved mode supports up to four-channel D1 multiplexed 8-bit output at 108 MHz
    • Supports concurrent NTSC and PAL inputs
  • Support crystal interface with on-chip oscillator and single clock input mode
  • Single 27-MHz clock input or crystal for all standards and all channels
  • Internal phase-locked loop (PLL) for line-locked clock (separate for each channel) and sampling
  • Standard programmable video output format
    • ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
    • YCbCr 16-bit 4:2:2 with embedded syncs
  • Macrovision copy protection detection
  • 3.3-V Compatible I/O
  • 128-pin TQFP package
  • Available in commercial (0°C to 70°C) temperature range
• Additional TVP5158 and TVP5157 Specific Features
  • Integrated four-channel audio ADC with audio sample rate of 8 kHz or 16 kHz
  • Support Master and Slave mode I2S Output
  • Support audio cascade connection
• Additional TVP5158 Specific Features
  • Enhanced channel multiplexing capability – Line-interleaved mode
  • Four-channel D1 multiplexed output at 8 bit at 108 MHz
  • Video cascade connection for 8-Ch CIF, 8-Ch Half-D1, and 8-Ch CIF + 1-Ch D1 outputs
  • Also available in Industrial (-40°C to 85°C) temperature range
• Qualified for Automotive Applications: (AEC-Q100 Rev G – TVP5158IPNPQ1, TVP5158IPNPRQ1)

• Supply voltage (V)
• 1.1, 1.8, 3.3
• Operating temperature range (C)
• 0 to 70, -40 to 85

TVP5158的完整型号有：TVP5157PNPR、TVP5158IPNP、TVP5158IPNPR、TVP5158PNP、TVP5158PNPR，以下是这些产品的关键参数及官网采购报价：

TVP5157PNPR，工作温度：0 to 70，封装：HTQFP (PNP)-128，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TVP5157PNPR的批量USD价格：7.745（1000+）

TVP5158IPNP，工作温度：-40 to 85，封装：HTQFP (PNP)-128，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TVP5158IPNP的批量USD价格：12.331（1000+）

TVP5158IPNPR，工作温度：-40 to 85，封装：HTQFP (PNP)-128，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TVP5158IPNPR的批量USD价格：10.434（1000+）

TVP5158PNP，工作温度：0 to 70，封装：HTQFP (PNP)-128，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TVP5158PNP的批量USD价格：11.382（1000+）

TVP5158PNPR，工作温度：0 to 70，封装：HTQFP (PNP)-128，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TVP5158PNPR的批量USD价格：9.485（1000+）

EVMX777G-01-20-00 — J6Entry/RSP 信息娱乐（CPU + 显示屏 + JAMR3）评估模块

J6Entry/RSP EVM 是一种评估平台，用于加快信息娱乐系统、可重新配置的数字群集或集成数字化驾驶舱等应用的开发速度，并缩短其上市时间。

主 CPU 板集成了以太网或 HDMI 等主要外设，而信息娱乐应用子板 (JAMR3) 和 LCD/TS 子板将补充 CPU 板，从而提供完整的系统以快速开始评估和应用开发。

TVP5158 PNP IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)