- 制造厂商：TI
- 产品类别：逻辑和电压转换
- 技术类目：电压转换器和电平转换器 - 自动方向电压转换器
- 功能描述：适用于漏极开路和推挽应用的 1 位双向电压电平转换器
- 点击这里打开及下载TXS0101的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional translation between any of the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- A Port
- 2500 V Human-Body Model (A114-B)
- 200 V Machine Model (A115-A)
- 1500 V Charged-Device Model (C101)
- B Port
- 8 kV Human-Body Model (A114-B)
- 200 V Machine Model (A115-A)
- 1500 V Charged-Device Model (C101)
- A Port
- No Direction-Control Signal Needed
- Maximum Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
- Available in the Texas Instruments NanoFree? Package
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
- VCC Isolation Feature – If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
- No Power-Supply Sequencing Required – Either VCCA or VCCB Can be Ramped First
- Ioff Supports Partial-Power-Down Mode Operation
- Technology Family
- TXS
- Bits (#)
- 1
- High input voltage (Min) (Vih)
- 1.45
- High input voltage (Max) (Vih)
- 5.5
- Vout (Min) (V)
- 1.65
- Vout (Max) (V)
- 5.5
- IOH (Max) (mA)
- 0
- IOL (Max) (mA)
- 0
- Rating
- Catalog
TXS0101的完整型号有：TXS0101DBVR、TXS0101DBVT、TXS0101DCKR、TXS0101DCKT、TXS0101DRLR、TXS0101YZPR，以下是这些产品的关键参数及官网采购报价：
TXS0101DBVR，工作温度：-40 to 85，封装：SOT-23 (DBV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TXS0101DBVR的批量USD价格：.153（1000+）
TXS0101DBVT，工作温度：-40 to 85，封装：SOT-23 (DBV)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TXS0101DBVT的批量USD价格：.353（1000+）
TXS0101DCKR，工作温度：-40 to 85，封装：SC70 (DCK)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TXS0101DCKR的批量USD价格：.153（1000+）
TXS0101DCKT，工作温度：-40 to 85，封装：SC70 (DCK)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TXS0101DCKT的批量USD价格：.353（1000+）
TXS0101DRLR，工作温度：-40 to 85，封装：SOT-5X3 (DRL)-6，包装数量MPQ：4000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TXS0101DRLR的批量USD价格：.153（1000+）
TXS0101YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TXS0101YZPR的批量USD价格：.171（1000+）
5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑 EVM
灵活的 EVM 设计用于支持具有 5 至 8 引脚数且采用 DCK、DCT、DCU、DRL 或 DBV 封装的任何器件。TXS-EVM — 1 to 8 bit TXS translator family evaluation module
The TXS-EVM is designed to support single, dual, quad and octal channel TXS devices. The TXS devices belong to the auto bidirectional voltage level translation family with an operating voltage between 1.2V and 5.5 V designed to support various generic voltage level translation applications across (...)
