The UC1708 family of power drivers is made with a high-speed, high-voltage, Schottky process to interface control functions and high-power switching devices — particularly power MOSFETs. Operating over a 5 V to 35 V supply range, these devices contain two independent channels. The A and B inputs are compatible with TTL and CMOS logic families, but can withstand input voltages as high as V_IN. Each output can source or sink up to 3 A as long as power dissipation limits are not exceeded.

Although each output can be activated independently with its own inputs, they can be forced low in common through the action of either a digital high signal at the Shutdown terminal or by forcing the Enable terminal low. The Shutdown terminal will only force the outputs low, it will not effect the behavior of the rest of the device. The Enable terminal effectively places the device in under-voltage lockout, reducing power consumption by as much as 90%. During under-voltage and disable (Enable terminal forced low) conditions, the outputs are held in a self-biasing, low-voltage, state.

The UC3708 and UC2708 are available in plastic 8-pin MINI DIP and 16-pin bat-wing DIP packages for commercial operation over a 0°C to 70°C temperature range and industrial temperature range of -25°C to 85°C respectively. For operation over a -55°C to 125°C temperature range, the UC1708 is available in hermetically sealed 8-pin MINI CDIP, 16 pin CDIP and 20 pin CLCC packages. Surface mount devices are also available.

• 3.0A Peak Current Totem Pole Output
• 5 to 35V Operation
• 25ns Rise and Fall Times
• 25ns Propagation Delays
• Thermal Shutdown and Under-Voltage Protection
• High-Speed, Power MOSFET Compatible
• Efficient High Frequency Operation
• Low Cross-Conduction Current Spike
• Enable and Shutdown Functions
• Wide Input Voltage Range
• ESD Protection to 2kV

• Number of channels (#)
• 2
• Power switch
• MOSFET, IGBT
• Peak output current (A)
• 3
• Input VCC (Min) (V)
• 5
• Input VCC (Max) (V)
• 35
• Features
• Enable Pin, Shutdown, Thermal Shutdown
• Operating temperature range (C)
• -55 to 125
• Rise time (ns)
• 25
• Fall time (ns)
• 25
• Prop delay (ns)
• 25
• Input threshold
• CMOS, TTL
• Channel input logic
• Non-Inverting
• Input negative voltage (V)
• 0
• Rating
• Military
• Driver configuration
• Dual

UC1708的完整型号有：5962-0051401Q2A、5962-0051401QEA、5962-0051401QPA、UC1708J、UC1708J883B、UC1708JE、UC1708JE883B、UC1708L883B，以下是这些产品的关键参数及官网采购报价：

5962-0051401Q2A，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-0051401Q2A的批量USD价格：24.651（1000+）

5962-0051401QEA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-0051401QEA的批量USD价格：22.871（1000+）

5962-0051401QPA，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-0051401QPA的批量USD价格：18.488（1000+）

UC1708J，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC1708J的批量USD价格：13.695（1000+）

UC1708J883B，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC1708J883B的批量USD价格：18.488（1000+）

UC1708JE，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC1708JE的批量USD价格：18.077（1000+）

UC1708JE883B，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC1708JE883B的批量USD价格：22.871（1000+）

UC1708L883B，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC1708L883B的批量USD价格：24.651（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)