The UC1846-EP control IC provides all of the necessary features to implement fixed-frequency, current-mode control schemes, while maintaining a minimum external parts count. The superior performance of this technique can be measured in improved line regulation, enhanced load-response characteristics, and a simpler, easier-to-design control loop. Topological advantages include inherent pulse-by-pulse current-limiting capability, automatic symmetry correction for push-pull converters, and the ability to parallel power modules, while maintaining equal current sharing.

Protection circuitry includes built-in undervoltage lockout and programmable current limit, in addition to soft-start capability. A shutdown function is also available, which can initiate either a complete shutdown with automatic restart or latch the supply off.

Other features include fully latched operation, double pulse suppression, deadline adjust capability, and a ±1% trimmed bandgap reference.

The UC1846-EP features low outputs in the OFF state.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of -55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree(1)
• Automatic Feed-Forward Compensation
• Programmable Pulse-by-Pulse Current Limiting
• Automatic Symmetry Correction in Push-Pull Configuration
• Enhanced Load-Response Characteristics
• Parallel Operation Capability for Modular Power Systems
• Differential Current-Sense Amplifier With Wide Common-Mode Range
• Double Pulse Suppression
• 500-mA (Peak) Totem-Pole Outputs
• ±1% Bandgap Reference
• Undervoltage Lockout
• Soft-Start Capability
• Shutdown Terminal
• 500-kHz Operation

(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

• Topology
• Boost, Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull
• Duty cycle (Max) (%)
• 50
• Supply voltage (Max) (V)
• 40
• UVLO thresholds on/off (V)
• 7.7/6.95
• Features
• Error Amplifier, Multi-topology, Soft Start, Synchronization Pin
• Operating temperature range (C)
• -55 to 125
• Rating
• HiRel Enhanced Product
• Frequency (Max) (kHz)
• 500
• Gate drive (Typ) (A)
• 0.5

UC1846-EP的完整型号有：UC1846MDWREP、V62/06606-01XE，以下是这些产品的关键参数及官网采购报价：

UC1846MDWREP，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UC1846MDWREP的批量USD价格：3.049（1000+）

V62/06606-01XE，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/06606-01XE的批量USD价格：3.049（1000+）

UC1846MDWREP，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UC1846MDWREP的批量USD价格：3.049（1000+）

V62/06606-01XE，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/06606-01XE的批量USD价格：3.049（1000+）