- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:电压基准 - 并联电压基准
- 功能描述:航天级 QMLV 可调节精密模拟控制器
- 点击这里打开及下载UC19432-SP的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The UC19432 is an adjustable precision analog controller with 100-mA sink capability if the ISET pin is grounded. A resistor between ISET and ground will modify the transconductance while decreasing the maximum current sink. This will add further control in the optocoupler configuration. The trimmed precision reference along with the non-inverting error amplifier inputs are accessible for custom configuration. A sister device, the UC19431 adjustable shunt regulator, has an on-board resistor network providing six preprogrammed voltage levels, as well as exernal programming capability.
- QML-V Qualified, SMD 5962-09233
- Rad Tolerant: 30 kRad(Si) TID(1)
- TID Dose Rate = 10 mRad/sec
- Programmable Transconductance for Optimum Current Drive
- Accessible 1.3 V precision Reference
- Both Error Amplifier Inputs Available
- 0.7% Overall Reference Tolerance
- 0.4% Initial Accuracy
- 2.4-V to 24-V Operating Supply Voltage and User Programmable Reference
- Reference Accuracy Maintained for Entire Range of Supply Voltage
- Superior Accuracy and Easier Compensation for Optoisolator Application
- Low Quiescent Current (0.5 mA Typ)
(1) Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available – contact factory for details.
- VO (V)
- 1.3
- Reference voltage
- 1.3
- Initial accuracy (Max) (%)
- 0.4
- VO adj (Min) (V)
- 2.4
- VO adj (Max) (V)
- 24
- Iz for regulation (Min) (uA)
- 500
- Rating
- Space
- Operating temperature range (C)
- -55 to 125
UC19432-SP的完整型号有:5962-0923301VPA,以下是这些产品的关键参数及官网采购报价:
5962-0923301VPA,工作温度:-55 to 125,封装:CDIP (JG)-8,包装数量MPQ:1个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:SNPB,TI官网5962-0923301VPA的批量USD价格:626.235(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)