The UC1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1-V reference is trimmed to 1% and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between C_T and the discharge terminals provides a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands.

• 8-V to 35-V Operation
• 5.1-V Reference Trimmed to 1%
• 100-Hz to 500-kHz Oscillator Range
• Separate Oscillator Sync Terminal
• Adjustable Dead-Time Control
• Internal Soft Start
• Pulse-by-Pulse Shutdown
• Input Undervoltage Lockout With Hysteresis
• Latching PWM to Prevent Multiple Pulses
• Dual Source and Sink Output Drivers

• Topology
• Boost, Buck, Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull
• Duty cycle (Max) (%)
• 49
• Supply voltage (Max) (V)
• 40
• UVLO thresholds on/off (V)
• 7/6.5
• Features
• Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier, Multi-topology, Soft Start, Synchronization Pin
• Operating temperature range (C)
• -25 to 85
• Rating
• Military
• Frequency (Max) (kHz)
• 500
• Gate drive (Typ) (A)
• 0.5

UC2525AM的完整型号有：UC2525AJ，以下是这些产品的关键参数及官网采购报价：

UC2525AJ，工作温度：-25 to 85，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC2525AJ的批量USD价格：7.36（1000+）

UC2525AJ，工作温度：-25 to 85，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC2525AJ的批量USD价格：7.36（1000+）