- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:直流/直流开关稳压器 - 降压稳压器
- 功能描述:降压脉宽调制器降压稳压器
- 点击这里打开及下载UC2573的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The UC3573 is a Buck pulse width modulator which steps down and regulates a positive input voltage. The chip is optimized for use in a single inductor buck switching converter employing an external PMOS switch. The block diagram consists of a precision reference, an error amplifier configured for voltage mode operation, an oscillator, a PWM comparator with latching logic, and a 0.5A peak gate driver. The UC3573 includes an undervoltage lockout circuit to insure sufficient input supply voltage is present before any switching activity can occur, and a pulse-by-pulse current limit. Input current can be sensed and limited to a user determined maximum value. In addition, a sleep comparator interfaces to the UVLO circuit which turns the chip off when the input voltage is below the UVLO threshold. This reduces the supply current to only 50uA, making the UC3573 ideal for battery powered applications.
- Simple Single Inductor Buck PWM Stepdown Voltage Regulation
- Drives External PMOS Switch
- Contains UVLO Circuit
- Includes Pulse-by-Pulse Current Limit
- Low 50μA Sleep Mode Current
- Vin (Min) (V)
- 4.2
- Vin (Max) (V)
- 35
- Vout (Min) (V)
- 1.5
- Vout (Max) (V)
- 30
- Iout (Max) (A)
- 0.5
- Iq (Typ) (uA)
- 9000
- Switching frequency (Min) (kHz)
- 200
- Switching frequency (Max) (kHz)
- 300
- Features
- Enable
- Regulated outputs (#)
- 1
- Number of phases
- 1
- Rating
- Catalog
UC2573的完整型号有:UC2573D、UC2573DTR,以下是这些产品的关键参数及官网采购报价:
UC2573D,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:75个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网UC2573D的批量USD价格:1.369(1000+)
UC2573DTR,工作温度:-40 to 85,封装:SOIC (D)-8,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网UC2573DTR的批量USD价格:1.166(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)