- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：栅极驱动器 - 低侧驱动器
- 功能描述：具有 5V UVLO、分离接地层和 6A 峰值输出电流的 6A/6A 单通道栅极驱动器
- 点击这里打开及下载UC2710的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The UC1710 family of FET drivers is made with a high-speed Schottky process to interface between low-level control functions and very high-power switching devices-particularly power MOSFET\x92s. These devices accept low-current digital inputs to activate a high-current, totem pole output which can source or sink a minimum of 6A.
Supply voltages for both VIN and VC can independently range from 4.7V to 18V. These devices also feature under-voltage lockout with hysteresis.
The UC1710 is packaged in an 8-pin hermetically sealed dual in-line package for \x9655°C to +125°C operation. The UC2710 and UC3710 are specified for a temperature range of \x9640°C to +85°C and 0°C to +70°C respectively and are available in either an 8-pin plastic dual in-line or a 5-pin, TO-220 package. Surface mount devices are also available.
- Totem Pole Output with 6A Source/Sink Drive
- 3ns Delay
- 20ns Rise and Fall Time into 2.2nF
- 8ns Rise and Fall Time into 30nF
- 4.7V to 18V Operation
- Inverting and Non-Inverting Outputs
- Under-Voltage Lockout with Hysteresis
- Thermal Shutdown Protection
- MINIDIP and Power Packages
- Number of channels (#)
- 1
- Power switch
- MOSFET, IGBT
- Peak output current (A)
- 6
- Input VCC (Min) (V)
- 4.7
- Input VCC (Max) (V)
- 18
- Features
- Thermal Shutdown
- Operating temperature range (C)
- -40 to 85
- Rise time (ns)
- 25
- Fall time (ns)
- 20
- Prop delay (ns)
- 35
- Input threshold
- CMOS
- Channel input logic
- Inverting, Non-Inverting
- Input negative voltage (V)
- 0
- Rating
- Catalog
- Undervoltage lockout (Typ)
- 4
- Driver configuration
- Complementary
UC2710的完整型号有：UC2710N，以下是这些产品的关键参数及官网采购报价：
UC2710N，工作温度：-40 to 85，封装：PDIP (P)-8，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网UC2710N的批量USD价格：6.547（1000+）
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
