- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：交流/直流和隔离式直流/直流开关稳压器 - PWM 控制器
- 功能描述：高速 PWM 控制器
- 点击这里打开及下载UC2825M的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.
Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.
These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.
- Compatible with Voltage or Current Mode Topologies
- Practical Operation Switching Frequencies to 1MHz
- 50ns Propagation Delay to Output
- High Current Dual Totem Pole Outputs (1.5A Peak)
- Wide Bandwidth Error Amplifier
- Fully Latched Logic with Double Pulse Suppression
- Pulse-by-Pulse Current Limiting
- Soft Start / Max. Duty Cycle Control
- Under-Voltage Lockout with Hysteresis
- Low Start Up Current (1.1mA)
- Topology
- Boost, Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull
- Duty cycle (Max) (%)
- 50
- Supply voltage (Max) (V)
- 12
- UVLO thresholds on/off (V)
- 9.2/8.4
- Features
- Adjustable Switching Frequency, Current Limiting, Error Amplifier, Multi-topology, Programmable Max Duty Cycle, Soft Start, Synchronization Pin
- Operating temperature range (C)
- -40 to 85
- Rating
- Military
- Frequency (Max) (kHz)
- 1000
- Gate drive (Typ) (A)
- 1.5
UC2825M的完整型号有：UC2825J，以下是这些产品的关键参数及官网采购报价：
UC2825J，工作温度：-40 to 85，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC2825J的批量USD价格：9.734（1000+）
UC2825J，工作温度：-40 to 85，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网UC2825J的批量USD价格：9.734（1000+）
