- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：交流/直流和隔离式直流/直流开关稳压器 - PWM 控制器
- 功能描述：具有 12V/8.0V UVLO 和 -40°C 至 85 °C 工作温度范围的 15V 电压模式 4MHz PWM 控制器
- 点击这里打开及下载UCC25706的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The UCC35705 and UCC35706 devices are 8-pin voltage mode primary side controllers with fast over-current protection. These devices are used as core high-speed building blocks in high performance isolated and non-isolated power converters.
UCC35705/UCC35706 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25 ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle.
Two UVLO options are offered. The UCC35705 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC35706 is better suited for offline applications.
The UCC35705/UCC35706 family is offered in 8-pin MSOP (DGK), SOIC (D) and PDIP (P) packages.
- Greater Than 4-MHz Operation
- Integrated Oscillator / Voltage Feed Forward Compensation
- >4:1 Input Voltage Range
- 25-ns Current Limit Delay
- Programmable Maximum Duty Cycle Clamp
- Optocoupler Interface
- 50-μA Start-Up Current
- 4.2-mA Operating Current @ 1 MHz
- Smallest Footprint of the 8-pin MSOP Package Minimizes Board Area and Height
- Topology
- Boost, Flyback, Forward
- Duty cycle (Max) (%)
- 93
- Supply voltage (Max) (V)
- 15
- UVLO thresholds on/off (V)
- 12/8
- Features
- Multi-topology
- Operating temperature range (C)
- -40 to 85
- Rating
- Catalog
- Frequency (Max) (kHz)
- 4000
- Gate drive (Typ) (A)
- 0.02
UCC25706的完整型号有：UCC25706D、UCC25706DGK，以下是这些产品的关键参数及官网采购报价：
UCC25706D，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC25706D的批量USD价格：1.107（1000+）
UCC25706DGK，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC25706DGK的批量USD价格：1.107（1000+）
UCC35705OR6CALC — 免费工具：UCC35705/6 设计计算器
This design utility allows the user to calculate the component values for RT, RDISCH and RFF for a choosen value of CT when designing with the UCC35705 or UCC35706. Calculations are given for both Duty Cycle Clamp and Maximum Duty Cycle configurations.
