The UCC27223 is a high-speed synchronous buck drivers for today’s high-efficiency, lower-output voltage designs. Using Predictive Gate Drive™ (PGD) control technology, these drivers reduce diode conduction and reverse recovery losses in the synchronous rectifier MOSFET(s).

The UCC27223 includes an enable pin that controls the operation of both outputs. A logic latch is also included to keep both outputs low until the first PWM input pulse comes in. The RDS(on) of the SR pull-down sourcing device is also minimized for higher frequency operations.

This closed loop feedback system detects body-diode conduction, and adjusts deadtime delays to minimize the conduction time interval. This virtually eliminates body-diode conduction while adjusting for temperature, load- dependent delays, and for different MOSFETs. Precise gate timing at the nanosecond level reduces the reverse recovery time of the synchronous rectifier MOSFET body-diode, reducing reverse recovery losses seen in the main (high-side) MOSFET. The lower junction temperature in the low-side MOSFET increases product reliability. Since the power dissipation is minimized, a higher switching frequency can also be used, allowing for smaller component sizes.

The UCC27223 is offered in the thermally enhanced 14-pin PowerPAD™ package with 2°C/W _jc.

• Maximizes Efficiency by Minimizing Body-Diode Conduction and Reverse Recovery Losses
• Transparent Synchronous Buck Gate Drive Operation From the Single Ended PWM Input Signal
• 12-V or 5-V Input Operation
• 3.3-V Input Operation With Availability of 12-V Bus Bias
• High-Side and Low-Side ±3-A Dual Drivers
• On-Board 6.5-V Gate Drive Regulator
• ±3-A TrueDrive? Gate Drives for High Current Delivery at MOSFET Miller Thresholds
• Automatically Adjusts for Changing Operating Conditions
• Thermally Enhanced 14-Pin PowerPAD? HTSSOP Package Minimizes Board Area and Junction Temperature Rise
• APPLICATIONS
  • Multiphase Converters in Combination With the TPS40090
  • Non-Isolated 3.3-V, 5-V and 12-V Input dc-to-dc Converters for Processor Power, General Computer, Telecom and Datacom Applications

Predictive Gate Drive? and PowerPAD? are trademarks of Texas Instruments Incorporated.

• Bus voltage (Max) (V)
• 20
• Power switch
• MOSFET
• Input VCC (Min) (V)
• -0.3
• Input VCC (Max) (V)
• 20
• Peak output current (A)
• 3
• Rise time (ns)
• 17
• Operating temperature range (C)
• -40 to 105
• Undervoltage lockout (Typ)
• 4
• Rating
• Catalog
• Number of channels (#)
• 2
• Fall time (ns)
• 17
• Prop delay (ns)
• 60
• Iq (uA)
• 220000
• Input threshold
• TTL
• Channel input logic
• TTL
• Negative voltage handling at HS pin (V)
• 0
• Features
• Dead Time Control, Soft Switching, Synchronous Rectification
• Driver configuration
• Inverting, Non-Inverting

UCC27223的完整型号有：UCC27223PWP、UCC27223PWPR，以下是这些产品的关键参数及官网采购报价：

UCC27223PWP，工作温度：-40 to 105，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC27223PWP的批量USD价格：1.883（1000+）

UCC27223PWPR，工作温度：-40 to 105，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC27223PWPR的批量USD价格：1.569（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)