The UCC2732x-Q1 family of high-speed drivers delivers 9 A of peak drive current in an industry-standard pinout. These drivers can drive large MOSFETs for systems requiring extreme Miller current due to high dV/dt transitions. This eliminates additional external circuits and can replace multiple components to reduce space, design complexity, and assembly cost. Two standard logic options are offered, inverting (UCC27321-Q1) and noninverting (UCC27322-Q1).

Using a design that minimizes shoot-through current, the outputs of these devices can provide high gate drive current where it is most needed at the Miller plateau region during the MOSFET switching transition. A unique hybrid-output stage paralleling bipolar and MOSFET transistors (TrueDrive) allows efficient current delivery at low supply voltages. With this drive architecture, UCC2732x-Q1 can be used in industry standard 6-A, 9-A, and many 12-A driver applications. Latch-up and ESD protection circuits are also included. Finally, the UCC2732x-Q1 provides an enable (ENBL) function to better control the operation of the driver applications. ENBL is implemented on pin 3, which was previously left unused in the industry-standard pinout. It is internally pulled up to VDD for active-high logic and can be left open for standard operation.

In addition to 8-pin SOIC (D) package offerings, the UCC2732x-Q1 also comes in the thermally enhanced but tiny 8-pin MSOP-PowerPAD (DGN) package. The PowerPAD package drastically lowers the thermal resistance to extend the temperature operation range and improve long-term reliability.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level 2
  • Device CDM ESD Classification Level C6
• Industry-Standard Pinout With Addition of Enable Function
• High Peak-Current Drive Capability of ±9 A at the Miller Plateau Region Using TrueDrive? Technology
• Efficient Constant-Current Sourcing Using a Unique Bipolar and CMOS Output Stage
• TTL and CMOS-Compatible Inputs Independent of Supply Voltage
• 20-ns Typical Rise and 15-ns Typical Fall Times With 10-nF Load
• Typical Propagation Delay Times of 25 ns With Input Falling and 35 ns With Input Rising
• 4-V to 15-V Supply Voltage
• Available in Thermally Enhanced MSOP PowerPAD? Package
• TrueDrive Output Architecture Using Bipolar and CMOS Transistors in Parallel

• Number of channels (#)
• 1
• Power switch
• MOSFET, IGBT
• Peak output current (A)
• 9
• Input VCC (Min) (V)
• 4
• Input VCC (Max) (V)
• 15
• Features
• Enable Pin
• Operating temperature range (C)
• -40 to 125
• Rise time (ns)
• 20
• Fall time (ns)
• 15
• Prop delay (ns)
• 25
• Input threshold
• CMOS, TTL
• Channel input logic
• Non-Inverting
• Input negative voltage (V)
• 0
• Rating
• Automotive
• Driver configuration
• Single

UCC27322-Q1的完整型号有：UCC27322QDGNRQ1、UCC27322QDRQ1，以下是这些产品的关键参数及官网采购报价：

UCC27322QDGNRQ1，工作温度：-40 to 125，封装：HVSSOP (DGN)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC27322QDGNRQ1的批量USD价格：.519（1000+）

UCC27322QDRQ1，工作温度：-40 to 125，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：Call TI，TI官网UCC27322QDRQ1的批量USD价格：.519（1000+）

UCC27321Q1EVM — 具有使能端的 UCC27321-Q1 汽车类单路 9A 高速低侧 MOSFET 驱动器

UCC2732X-Q1 是一系列高速驱动器，能够提供高达 9A 的峰值驱动电流，经优化可适用于因高 dv/dt 转换而需要极端 Miller 电流的系统。借助该 EVM，可实现对所提供两个逻辑选项（反相 (UCC27321-Q1) 和非反相 (UCC27322-Q1)）的评估。UCC27322-Q1 提供使能 (ENBL) 功能以更好地控制驱动器应用的操作，为方便起见，已将此功能在 EVM 上进行了细分。此系列的驱动器可用作低功耗控制器（分立式控制器、DSP、MCU 或微控制器）和功率 MOSFET 之间的接口。

UCC27322Q1EVM — 具有使能端的 UCC27322-Q1 汽车类单路 9A 高速低侧 MOSFET 驱动器

UCC2732X-Q1 是一系列高速驱动器，能够提供高达 9A 的峰值驱动电流，经优化可适用于因高 dv/dt 转换而需要极端 Miller 电流的系统。借助该 EVM，可实现对所提供两个逻辑选项（反相 (UCC27321-Q1) 和非反相 (UCC27322-Q1)）的评估。UCC27321-Q1 提供使能 (ENBL) 功能以更好地控制驱动器应用的操作，为方便起见，已将此功能在 EVM 上进行了细分。此系列的驱动器可用作低功耗控制器（分立式控制器、DSP、MCU 或微控制器）和功率 MOSFET 之间的接口。

UCC27322 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

UCC2732X Schematic Review Template

此 200W SEPIC 转换器参考设计提供 5V 至 200V 的非隔离式可调输出电压和最大 4A 的输出电流。可通过占空比为 0% 至 100% 的脉宽调制 (PWM) 输入设置输出电压。