The UCC2742x family of high-speed dual MOSFET drivers can deliver large peak currents into capacitive loads. Three standard logic options are offered – dual-inverting, dual-noninverting, and one-inverting and one-noninverting driver. The thermally enhanced 8-pin PowerPAD™ MSOP package (DGN) drastically lowers the thermal resistance to improve long-term reliability. It is also offered in the standard SOIC-8 (D) or PDIP-8 (P) packages.

Using a design that inherently minimizes shoot-through current, these drivers deliver 4A of current where it is needed most at the Miller plateau region during the MOSFET switching transition. A unique BiPolar and MOSFET hybrid output stage in parallel also allows efficient current sourcing and sinking at low supply voltages.

The UCC2742x provides enable (ENB) functions to have better control of the operation of the driver applications. ENBA and ENBB are implemented on pins 1 and 8 which were previously left unused in the industry standard pin-out. They are internally pulled up to V_DD for active high logic and can be left open for standard operation.

• Industry-Standard Pin-Out
• Enable Functions for Each Driver
• High Current Drive Capability of ±4 A
• Unique BiPolar and CMOS True Drive Output Stage Provides High Current at MOSFET Miller Thresholds
• TTL/CMOS Compatible Inputs Independent of Supply Voltage
• 20-ns Typical Rise and 15-ns Typical Fall Times with 1.8-nF Load
• Typical Propagation Delay Times of 25 ns with Input Falling and 35 ns with Input Rising
• 4-V to 15-V Supply Voltage
• Dual Outputs Can Be Paralleled for Higher Drive Current
• Available in Thermally Enhanced MSOP PowerPAD? Package
• Rated From –40°C to 125°C

• Number of channels (#)
• 2
• Power switch
• MOSFET, IGBT
• Peak output current (A)
• 4
• Input VCC (Min) (V)
• 4
• Input VCC (Max) (V)
• 15
• Features
• Enable Pin
• Operating temperature range (C)
• -40 to 105
• Rise time (ns)
• 20
• Fall time (ns)
• 15
• Prop delay (ns)
• 25
• Input threshold
• CMOS, TTL
• Channel input logic
• Inverting, Non-Inverting
• Input negative voltage (V)
• 0
• Rating
• Catalog
• Driver configuration
• Inverting, Non-Inverting

UCC27425的完整型号有：UCC27425D、UCC27425DGN、UCC27425DGNR、UCC27425DR、UCC27425P，以下是这些产品的关键参数及官网采购报价：

UCC27425D，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC27425D的批量USD价格：.528（1000+）

UCC27425DGN，工作温度：-40 to 105，封装：HVSSOP (DGN)-8，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC27425DGN的批量USD价格：.528（1000+）

UCC27425DGNR，工作温度：-40 to 105，封装：HVSSOP (DGN)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC27425DGNR的批量USD价格：.44（1000+）

UCC27425DR，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC27425DR的批量USD价格：.44（1000+）

UCC27425P，工作温度：-40 to 105，封装：PDIP (P)-8，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网UCC27425P的批量USD价格：.506（1000+）

UCC27423-4-5-Q1EVM — 具有使能端的 UCC2742xQ1 双路 4A 高速低侧 MOSFET 驱动器评估模块 (EVM)

UCC2742xQ1 EVM 是一款高速双 MOSFET 评估模块，其提供了用于快速轻松地启动 UCC2742xQ1 驱动器的测试平台。由 4V 到 15V 外部单电源供电，具有一整套测试点和跳线。所有器件均具有独立的输入和输出线路，且所有器件均共享一个共用接地。提供使能 (ENBL) 功能旨在更好地控制驱动器应用的操作，器件的驱动器信号可通过同一使能引脚启用或禁用。

UCC27425 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)