The UCC2813-x-Q1 device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC284x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC2813-x-Q1 device family offers a variety of package options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC2813-3-Q1 and UCC2813-5-Q1 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC2813-2-Q1 device and UCC2813-4-Q1 device make these ideal choices for use in off-line power supplies.

The UCC2813-x-Q1 device series is specified for operation from –40°C to 125°C.

• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
  • Device temperature grade 1: –40°C to 125°C TA
  • Device HBM classification level 2: ±2 kV
  • Device CDM classification level C5: >1000 V
• 100-μA typical starting supply current
• 500-μA typical operating supply current
• Operation to 1 MHz
• Internal soft start
• Internal fault soft start
• Internal leading-edge blanking of the current-sense signal
• 1-A totem-pole output
• 70-ns typical response from current-sense to gate-drive output
• 1.5% tolerance voltage reference
• Same pinout as the UCC3802 device, UC3842 device, and UC3842A device families

• Topology
• Boost, Flyback, Forward
• Duty cycle (Max) (%)
• 100
• Supply voltage (Max) (V)
• 11
• UVLO thresholds on/off (V)
• 4.1/3.6
• Features
• Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier, Leading Edge Blanking, Multi-topology, Soft Start
• Operating temperature range (C)
• -40 to 125
• Rating
• Automotive
• Frequency (Max) (kHz)
• 1000
• Gate drive (Typ) (A)
• 1

UCC2813-3-Q1的完整型号有：UCC2813QDR-3Q1、UCC2813QPWR-3Q1，以下是这些产品的关键参数及官网采购报价：

UCC2813QDR-3Q1，工作温度：-40 to 125，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC2813QDR-3Q1的批量USD价格：1.037（1000+）

UCC2813QPWR-3Q1，工作温度：-40 to 125，封装：TSSOP (PW)-8，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC2813QPWR-3Q1的批量USD价格：1.037（1000+）

PMP2187 — 适用于医疗封装的反激式、线性稳压器 (5.75V@10mA)

此设计可提供隔离的 5V（两个）、3.3V、2.5V 及 -5V 输出。对于噪声敏感应用（如医学成像和数据采集），所有输出均可采用低压降 (LDO) 线性稳压器进行噪声过滤。

TIDM-AUTO-DC-LED-LIGHTING — Multiple Channels of High Density LED Control for Automotive Headlight Applications

此设计采用 TMS320F2803x Piccolo 微控制器，实现了通常适合汽车照明系统的高效率多通道直流/直流 LED 控制系统。此设计支持多达 6 个 LED 控制通道，每个通道具有最高 1.2A 的电流驱动能力。凭借升压和降压双级电源拓扑，此系统可通过 8V 至 20V 的宽输入直流电压范围运行，这非常适合汽车应用。