UCCx8C4x family are high-performance, current-mode PWM controllers. The UCCx8C4x is an enhanced BiCMOS version with pin-for-pin compatibility to the industry standard UCx84xA family and UCx84x family of PWM controllers. The BiCMOS technology offers lower power consumption to improve efficiency as well as faster current sense and oscillator frequency. In addition, lower startup voltage versions of 7 V are offered as UCCx8C40 and UCCx8C41 for use in battery systems. The UCC28C4x series is specified for operation from –40°C to 105°C, and the UCC38C4x series is specified for operation from 0°C to 70°C.

Providing necessary features to control fixed frequency, peak current-mode power supplies, this family offers the following performance advantages. The device offers high-frequency operation up to 1 MHz, suitable for high speed applications. The trimmed discharge current enables more precise programming of the maximum duty cycle and dead-time limit when compared to the UCx84x family. Reduced start-up and operating currents minimizes start-up loss and low operating power consumption for improved efficiency. The device also features a fast current-sense-to-output delay time of 35 ns for superior overload protection at the power switch, and a ±1-A peak output current capability with improved rise and fall times for driving large external MOSFETs directly.

The UCC38C4x family is offered in 8-pin VSSOP (DGK), 8-pin SOIC (D), and 8-pin PDIP (P) packages.

• Enhanced Replacement for UCx84x and UCx84xA Family With Pin-to-Pin Compatibility
• 1-MHz Operation
• 50-μA Standby Current, 100-μA Maximum
• Low Operating Current of 2.3 mA at 52 kHz
• Fast 35-ns Cycle-by-Cycle Over-Current Limiting
• ±1-A Peak Output Current
• Rail-to-Rail Output Swings with 25-ns Rise and 20-ns Fall Times
• ±1% Initial Trimmed 2.5-V Error Amplifier Reference
• Trimmed Oscillator Discharge Current
• New Undervoltage Lockout Versions
• VSSOP-8 Package Minimizes Board Space

• Topology
• Flyback, Boost, Buck, SEPIC, Forward
• Duty cycle (Max) (%)
• 100
• Supply voltage (Max) (V)
• 18
• UVLO thresholds on/off (V)
• 7/6.6
• Features
• Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier, Multi-topology, Programmable Max Duty Cycle
• Operating temperature range (C)
• -40 to 105
• Rating
• Catalog
• Frequency (Max) (kHz)
• 1000
• Gate drive (Typ) (A)
• 1

UCC28C40的完整型号有：UCC28C40D、UCC28C40DGK、UCC28C40DGKR、UCC28C40DR，以下是这些产品的关键参数及官网采购报价：

UCC28C40D，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC28C40D的批量USD价格：.643（1000+）

UCC28C40DGK，工作温度：-40 to 105，封装：VSSOP (DGK)-8，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC28C40DGK的批量USD价格：.643（1000+）

UCC28C40DGKR，工作温度：-40 to 105，封装：VSSOP (DGK)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网UCC28C40DGKR的批量USD价格：.536（1000+）

UCC28C40DR，工作温度：-40 to 105，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC28C40DR的批量USD价格：.536（1000+）

UCC28C56EVM-066 — 适用于 UCC28C56H-Q1 初级侧控制（使用 AUX 绕组）反激式稳压器的评估模块

UCC28C56EVM-066 是一款适用于 EV 和 HEV 汽车动力总成的高效初级侧控制（使用 AUX 绕组）反激式辅助电源。该设计可为 800V 电池系统提供 15.2VTYP 40W 输出。在 125V 至 1000V 的输入电压范围内提供 40W 功率。确切输出电压取决于负载。该设计输入为 40V 至 125V，可提供功率为 20W。该 EVM 采用 1700V 碳化硅 (SiC) MOSFET，非常适合 800V 电池系统。