The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.

The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.

• 100-μA typical starting supply current
• 500-μA typical operating supply current
• Operation to 1 MHz
• Internal soft start
• Internal fault soft start
• Internal leading-edge blanking of the current-sense signal
• 1-A totem-pole output
• 70-ns typical response from current-sense to gate-drive output
• 1.5% Tolerance Voltage Reference
• Same Pinout as the UCC3802 device, UC3842 device, and UC3842A device families

• Topology
• Flyback, Boost,
• Duty cycle (Max) (%)
• 50
• Supply voltage (Max) (V)
• 12
• UVLO thresholds on/off (V)
• 12.5/8.3
• Features
• Adjustable Switching Frequency, Current Limiting, Dead Time Control, Error Amplifier, Leading Edge Blanking, Multi-topology, Soft Start
• Operating temperature range (C)
• 0 to 70
• Rating
• Catalog
• Frequency (Max) (kHz)
• 1000
• Gate drive (Typ) (A)
• 1

UCC3813-4的完整型号有：UCC3813D-4、UCC3813DTR-4、UCC3813PW-4，以下是这些产品的关键参数及官网采购报价：

UCC3813D-4，工作温度：0 to 70，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC3813D-4的批量USD价格：.829（1000+）

UCC3813DTR-4，工作温度：0 to 70，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网UCC3813DTR-4的批量USD价格：.691（1000+）

UCC3813PW-4，工作温度：0 to 70，封装：TSSOP (PW)-8，包装数量MPQ：150个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC3813PW-4的批量USD价格：.691（1000+）

UCCx804, UCCx813-4 Families PSpice Transient Model (Rev. B)

此参考设计是一款交流开关无桥功率因数校正 (PFC) 功率级，在连续导通模式 (CCM) 下运行。它采用通用交流输入电压（90VAC 至 264VAC），提供 390V、1000W 的低压线路输出和 1500W 的高压线路输出。该设计采用 UCD3138 数字控制器和 UCC21220 隔离式栅极驱动器。它在 115VAC 输入下可实现 97.1% 的峰值效率，在 230VAC 输入下可实现 98.3% 的峰值效率。其总谐波失真 (THD) 在 115VAC、1000W 下低于 1.2%，在 230VAC、1500W 下低于 2%。处于满负载时，115VAC 和 230VAC (...)

PMP20289 — 采用高电压 GaN 器件的 400V – 12V/500W 高频谐振转换器参考设计

PMP20289 经搭建和测试用于验证高频（>400kHz 标称开关频率）LLC 系列谐振转换器 (LLC-SRC) 的性能，此转换器由德州仪器 (TI) 的高压 GaN FET 在标称（390V 至 12V）电压转换中实现。数字控制器 UCD3138A 与 UCD7138 SR 控制器配套使用，以优化 LLC-SRC 效率。TI 的高压直接驱动 GaN FET LMG3410 可用于实现快速开关，并且能够最大限度地缩短半桥开关之间的死区时间。测试结果表明，在 24A 负载下可实现 96.8% 的峰值效率，在 42A 全负载下可实现 96.3% 的效率（390V 至 12V (...)

PMP20637 — 具有 TI HV GaN FET 的高效率和高功率密度 1kW 谐振转换器参考设计

This reference design is a high efficiency, high power density and light weight resonant converter reference design. It converts a 390V input to a 48V/1kW output. The PMP20637 power stage has over 140W/in^3 power density. The whole board weight is less than 210g. With fixed 950kHz switching (...)

PMP20306 — 具有输入电压检测功能的 200V 至 400V 输入（标称值）三路输出偏置电源参考设计

This reference design is a compact and thermally efficient design intended to be used as a bias supply for half-bridge converters. A DCM Flyback with UCC3813-4 controller is used to generate two isolated 12V supplies for half-bridge converter primary driving circuitry. One 5V is generated at the (...)