The UCCx9411 family of low-input voltage, single-inductor-boost converters is optimized to operate from a single or dual alkaline cell, and steps up to a 3.3 V, 5 V, or adjustable output at 200 mW. The UCCx9411 family also provides an auxiliary 7 V output, primarily for the gate-drive supply, which can be used for applications requiring an auxiliary output, such as 5 V, by linear regulating. The primary output starts up under full load at input voltages typically as low as 0.8 V with a ensured max of 1 V, and operates down to 0.5 V once the converter is operating, thereby maximizing battery usage.

The UCCx9411 family is designed to accommodate demanding applications such as pagers and cell phones that require high efficiency over a wide operating range of several milliwatts to a couple of hundred milli-watts. High efficiency at low output current is achieved by optimizing switching and conduction losses with a low total quiescent current. At higher output current, the 0.5 synchronous rectifier along with continuous mode conduction provide high power efficiency. The wide input voltage range of the UCCx9411 family can accommodate other power sources such as NiCd and NiMH.

The UCCx9411 family also provides shutdown control. Packages available are the 8-pin SOIC (D) and 8-pin TSSOP (PW) to optimize board space.

• 1 V Input Voltage Operation Start-Up Ensured Under Full Load on Main Output, and Operation Down to 0.5 V
• 200 mW Output Power at Battery Voltages as Low as 0.8 V
• Secondary 7 V Supply from a Single Inductor
• Output Fully Disconnected in Shutdown
• Adaptive Current Mode Control for Optimum Efficiency
• High Efficiency Over Wide Operating Range
• 6 μA Shutdown Supply Current
• Output Reset Function with Programmable Reset Period

• Vin (Min) (V)
• 1
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 2
• Vout (Max) (V)
• 5
• Switch current limit (Typ) (A)
• 0.55
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 500
• Switching frequency (Max) (kHz)
• 500
• Iq (Typ) (mA)
• 0.048
• Features
• Synchronous Rectification
• Duty cycle (Max) (%)
• 100
• Rating
• Catalog

UCC39411的完整型号有：UCC39411D、UCC39411PW，以下是这些产品的关键参数及官网采购报价：

UCC39411D，工作温度：0 to 70，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC39411D的批量USD价格：2.225（1000+）

UCC39411PW，工作温度：0 to 70，封装：TSSOP (PW)-8，包装数量MPQ：150个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCC39411PW的批量USD价格：2.225（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)