The UCD7230A is one in the UCD7k family of digital control compatible drivers for applications utilizing digital control techniques or applications requiring fast local peak current limit protection.

The UCD7230A is a MOSFET gate driver specifically designed for synchronous buck applications. It is ideally suited to provide the bridge between digital controllers such as the UCD91xx or the UCD92xx and the power stage. With cycle-by-cycle current limit protection, the UCD7230A device protects the power stage from faulty input signals or excessive load currents.

The UCD7230A includes high-side and low-side gate drivers which utilize Texas Instrument’s TrueDrive output architecture. This architecture delivers rated current into the gate capacitance of a MOSFET during the Miller plateau region of the switching. Furthermore, the UCD7230A offers a low offset differential amplifier with a fixed gain of 48. This amplifier greatly simplifies the task of conditioning small current sense signals inherent in high efficiency buck converters.

The UCD7230A includes a 3.3-V, 10-mA linear regulator to provide power to digital controllers such as the UCD91xx. The UCD7230A is compatible with standard 3.3-V I/O ports of the UCD91xx, the TMS320™ family DSPs, microprocessors, or ASICs.

The UCD7230A is offered in the space-saving QFN package. Package pin out has been carefully designed for optimal board layout

• Input from Digital Controller Sets Operating Frequency and Duty Cycle
• Up to 2-MHz Switching Frequency
• Dual Current Limit Protection with Independently Adjustable Thresholds
• Fast Current Sense Circuit with Adjustable Blanking Interval Prevents Catastrophic Current Levels
• Digital Output Current Limit Flag
• Low Offset, Gain of 48, Differential Current Sense Amplifier
• 3.3-V, 10-mA Internal Regulator
• Dual TrueDrive? High-Current Drivers
• 10-ns Typical Rise/Fall Times with 2.2-nF Loads
• 4.5-V to 15.5-V Supply Voltage Range
• APPLICATIONS
  • Digitally-Controlled Synchronous-Buck Power Stages for Single and Multi-Phase Applications
  • Especially Suited for Use with UCD91xx or UCD92xx Contollers
  • High-Current Multi-Phase VRM/EVRD Regulators for Desktop, Server, Telecom and Notebook Processors
  • Digitally-Controlled Synchronous-Buck Power Supplies Using μCs or the TMS320 DSP Family

TrueDrive is a trademark of Texas Instruments.

• Supply voltage (Min) (V)
• 4.5
• Supply voltage (Max) (V)
• 15
• Number of outputs
• 1
• Peak output current (A)
• 4
• Input threshold
• CMOS, TTL
• Prop delay (ns)
• 30
• Driver configuration
• Dual
• Operating temperature range (C)
• -40 to 105
• Rating
• Catalog

UCD7230A的完整型号有：UCD7230ARGWT，以下是这些产品的关键参数及官网采购报价：

UCD7230ARGWT，工作温度：-40 to 105，封装：VQFN (RGW)-20，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网UCD7230ARGWT的批量USD价格：.623（1000+）

FUSION_DIGITAL_POWER_DESIGNER — Digital Power 软件

Fusion Digital Power图形用户界面 (GUI) 软件用于配置和监视精选的德州仪器 (TI) 数字电源控制器以及序列发生器/运行状况监视器。此应用程序使用 PMBus 协议通过 TI USB 适配器经由串行总线与器件进行通信。

FUSION_MFR_GUI — Fusion Digital Power 制造工具

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software. This tool is typically used in manufacturing (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)