The VSP2232 is a complete mixed-signal processing IC for digital cameras that provides signal conditioning and analog-to-digital conversion for the output of a CCD array. The primary CCD channel provides correlated double sampling (CDS) to extract the video information from the pixels, a \x966-dB to 42-dB gain with digital control for varying illumination conditions, and black level clamping for an accurate black level reference.

Input signal clamping and offset correction of the input CDS is also performed. The stable gain control is linear in dB. Additionally, the black level is quickly recovered after gain change.

The VSP2232Y is pin-to-pin compatible with the VSP2262Y (12-bit 20 MHz) one-chip product.

The VSP2232Y is available in a 48-pin LQFP package and operates from a single 3-V/3.3-V supply.

• CCD Signal Processing
  • Correlated Double Sampling (CDS)
  • Programmable Black Level Clamping
• Programmable Gain Amplifier (PGA)
  • \x966-dB to 42-dB Gain Ranging
• 10-Bit Digital Data Output
  • Up to 36-MHz Conversion Rate
  • No Missing Codes
• 76-dB Signal-to-Noise Ratio
• Portable Operation
  • Low Voltage: 2.7 V to 3.6 V
  • Low Power: 130 mW (typ) at 3.0 V
  • Standby Mode: 6 mW

• Resolution (Bits)
• 12
• Samples/sec (MSPS)
• 36
• Supply voltage (Max)
• 3.6
• Operating temperature range (C)
• 0 to 85
• Output data format
• CMOS Parallel

VSP2232的完整型号有：VSP2232Y，以下是这些产品的关键参数及官网采购报价：

VSP2232Y，工作温度：0 to 85，封装：LQFP (PT)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网VSP2232Y的批量USD价格：20.46（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)