The VSP5620/21/22 are high-speed, high-performance, 16-bit analog-to-digital-converters (ADCs) that have four independent sampling circuit channels for multi-output charge-coupled device (CCD) and complementary metal oxide semiconductor (CMOS) line sensors. Pixel data from the sensor are sampled by the sample/hold (SH) or correlated double sampler (CDS) circuit, and are then converted to digital data by an ADC. Data output is selectable in low-voltage differential signaling (LVDS) or CMOS modes.

The VSP5620/21/22 include a programmable gain to support the pixel level inflection caused by luminance and a built-in light-emitting diode (LED) driver to adjust the brightness. The integrated digital-to-analog-converter (DAC) can be used to adjust the offset level for the analog input signal. Furthermore, the timing generator (TG) is integrated in these devices for the control of sensor operation.

The VSP5620/21/22 use 1.65 V to 1.95 V for the core voltage and 3.0 V to 3.6 V for I/Os. The core voltage is supplied by a built-in low-dropout regulator (LDO).

• Four-Channel CCD/CMOS Signal: 2-Channel, 3-Channel, and 4-Channel Selectable
• Power Supply: 3.3 V Only, Typ (Built-in LDO, 3.3 V to 1.8 V)
• Maximum Conversion Rate:
  • VSP5620: 35 MSPS
  • VSP5621: 50 MSPS
  • VSP5622: 70 MSPS
• 16-Bit Resolution
• CDS/SH Selectable
• Maximum Input Signal Range: 2.0 V
• Analog and Digital Hybrid Gain:
  • Analog Gain: 0.5 V/V to 3.5 V/V in 3/64-V/V Steps
  • Digital Gain: 1 V/V to 2 V/V in 1/256-V/V Steps
• Offset Correction DAC: ±250 mV, 8-Bit
• Standard LVDS/CMOS Selectable Output:
  • LVDS:
    • Data Channel: 2-Channel
    • Clock Channel: 1-Channel
    • 8-Bit/7-Bit Serializer Selectable
  • CMOS: 4 Bits × 4
• Timing Generator
  • Fast Transfer Clock: One Signal
  • Slow Transfer Clock: One Signal
• LED Driver: Three Channels
  • Current: 60-mA/Channel Max, 16-Steps/Channel
• Timing Adjustment Resolution: tMCLK/48
• Input Clamp/Input Reference Level Internal/ External Selectable
• Reference DAC: 0.5 V, 1.1 V, 1.5 V, 2 V
• SPI: Three-Wire Serial
• GPIO: Four-Port
• Power (at 4-channel, LVDS, 3.3 V, without LED Driver):
  • VSP5620: 320 mW at 35 MSPS
  • VSP5621: 406 mW at 50 MSPS
  • VSP5622: 523 mW at 70 MSPS

• Resolution (Bits)
• 16
• Number of channels (#)
• 4
• Samples/sec (MSPS)
• 50
• Supply voltage (Max)
• 3.3
• Operating temperature range (C)
• 0 to 85
• Output data format
• CMOS Selectable, Standard LVDS

VSP5621的完整型号有：VSP5621RSLR，以下是这些产品的关键参数及官网采购报价：

VSP5621RSLR，工作温度：0 to 85，封装：VQFN (RSL)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网VSP5621RSLR的批量USD价格：5.518（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)